Abstract:The durability and reliability of H-2/O-2 proton exchange membrane fuel cell (PEMFC) is a key factor that prevents its wide application in the civil field. PEMFC inevitably experience different dynamic loading cycles according to different power switching requirements during practical operation. To explore the degradation behavior under different dynamic cycles, a single H-2/O-2 PEMFC with 50 cm(2) active area was operated under the circulating current density from 100 mAcm(-2) to 600 mAcm(-2), 100 mAcm(-2) to 800 mAcm(-2), and 100 mAcm(-2) to 1000 mAcm(-2), respectively. The change of polarization curve, performance degradation at different current density, Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS) were characterized to investigate the performance degradation over dynamic current cycles. Besides, the Scanning Electron Microscopy (SEM) was used to evaluate the degradation of catalyst layer. The results indicated that the degradation rate of the fuel cell performance increased corresponding to the cycle number, at 1200 mA/cm(2), it with a total performance degradation rate of 11.83% after 2000 dynamic loading cycles with the circulating current density from 100 mAcm(-2) to 600 mAcm(-2). The degradation of electrochemical performance such as CV and EIS was consistent with that of fuel cell performance. The degradation rate is accelerated with the increase of loading cycle number and load step amplitude. What' more, EIS provides additional sensitivity to differentiate catalyst layer degradation within PEMFC. Moreover, the degradation of the catalyst layer became much more severe under a larger load step amplitude. (c) 2021 Elsevier Ltd. All rights reserved.

Degradation Analysis of the Core Components of Metal Plate Proton Exchange Membrane Fuel Cell Stack under Dynamic Load Cycles

Performance degradation and process engineering of the 10 kW proton exchange membrane fuel cell stack

Experimental Study of the Influence of Dynamic Load Cycle and Operating Parameters on the Durability of PEMFC

Proton exchange membrane fuel cell degradation under close to open-circuit conditions

Degradation Differences of a Single Proton Exchange Membrane Fuel Cell: Energy Management Strategy and Dynamic Programming

Degradation behavior of a proton exchange membrane fuel cell stack under dynamic cycles between idling and rated condition

Experimental Study on the Effect of Flow Channel Parameters on the Durability of PEMFC Stack and Analysis of Hydrogen Crossover Mechanism

Investigation of Dynamic Driving Cycle Effect on Performance Degradation and Micro-Structure Change of PEM Fuel Cell

Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack

The Durability Investigation of a 10‐cell Metal Bipolar Plate Proton Exchange Membrane Fuel Cell Stack

Dynamic Current Cycles Effect on the Degradation Characteristic of a H2/O2 Proton Exchange Membrane Fuel Cell

Failure of Cathode Gas Diffusion Layer in 1 Kw Fuel Cell Stack under New European Driving Cycle

Degradation Behavior of Membrane–electrode-Assembly Materials in 10-Cell PEMFC Stack

Investigation of the reversible performance degradation mechanism of the PEMFC stack during long-term durability test

Local resolved investigation of PEMFC performance degradation mechanism during dynamic driving cycle

Effect of driving cycle on the performance of PEM fuel cell and microstructure of membrane electrode assembly

Failure Behavior of Gas Diffusion Layer in Proton Exchange Membrane Fuel Cells

Decomposition on the Degradation Mechanism of the Cathode Catalyst Layer under 1000 H of On-Road Heavy-Duty Transportation

Low Temperature Durability and Consistency Analysis of Proton Exchange Membrane Fuel Cell Stack Based on Comprehensive Characterizations

Rapid degradation characteristics of an air‐cooled PEMFC stack

Quantification and evolution on degradation mechanisms of proton exchange membrane fuel cell catalyst layer under dynamic testing conditions