Abstract:The proton exchange membrane (PEM) fuel cell is an ideal automotive power source with great potential, owing to its high efficiency and zero emissions. However, the durability and life-span limit its large-scale application. Complex automotive operating conditions significantly accelerate fuel cell aging, and result in diverse degradation mechanisms that require comprehensive understanding. This review focuses on three harsh conditions of open-circuit/idling, dynamic load, and startup-shutdown. In-situ and ex-situ accelerated stress tests (ASTs) for the three conditions are summarized in terms of methodology, research objectives, and conditions of application. Reversible decay may arise during ASTs and lead to an over-estimation of the aging state, of which the causes and recovery procedures are emphasized. The degradation mechanisms are elaborated systematically according to parameter characteristics, microstructure, and aging reactions. First, increased gas permeation and a high cathode potential during open-circuit/idling combine to intensify generation of free radicals that cause membrane degradation. Pt degradation and migration are also accelerated, characterized by increased Pt particle growth and precipitation in the membrane. The debate regarding the effect of Pt precipitation on membrane degradation is resolved based on a literature review. Second, dynamic load brings about changes in the thermal/humidity state, altered reactant demand, and potential cycling, which lead to mechanical degradation, gas starvation, and Pt particle growth, respectively. To account for the accelerated particle growth, electrochemical Ostwald ripening and increased Pt dissolution are reviewed. Third, an air/hydrogen boundary appears in the anode under startup-shutdown condition and causes carbon corrosion in the local cathode via the reverse current mechanism. The cathode thereby suffers from severe and non-uniform structural damage and even structural collapse, accompanied by Pt agglomeration and detachment. Meanwhile, difficulties in mass transfer arise because of ionomer redistribution, decreased porosity, and carbon surface hydrophilization. In addition, cold start produces severe damage to component structures. This paper seeks to guide further investigation into improved fuel cell durability via mechanism analysis, condition optimization, control strategy development, structural design of the membrane electrode assembly, and component material development.

Failure of Cathode Gas Diffusion Layer in 1 Kw Fuel Cell Stack under New European Driving Cycle

Performance degradation and process engineering of the 10 kW proton exchange membrane fuel cell stack

Mass transfer capacity degradation of gas diffusion layer under 1000 hours real-world heavy duty load cycles

Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack

Degradation mechanism analysis of substrate and microporous layer of gas diffusion layer in proton exchange membrane fuel cell

Key Components Degradation in Proton Exchange Membrane Fuel Cells: Unraveling Mechanisms through Accelerated Durability Testing

Rapid degradation characteristics of an air‐cooled PEMFC stack

Analysis On The Pem Fuel Cells After Accelerated Life Experiment

Mechanistic Insight into the Accelerated Decay of Fuel Cells from Catalyst-Layer Structural Failure

Quantification and evolution on degradation mechanisms of proton exchange membrane fuel cell catalyst layer under dynamic testing conditions

Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions

Dynamic transport characteristics and performance response of commercial-size polymer electrolyte membrane fuel cell stack: An experimental study

Carbon corrosion induced fuel cell accelerated degradation warning: From mechanism to diagnosis

Study on durability of proton exchange membrane fuel cell stack based on mesoporous carbon supported platinum catalysts under dynamic cycles conditions

Investigation of Performance Degradation and Control Strategies of PEMFC under Three Typical Operating Conditions

Effect of load-cycling amplitude on performance degradation for proton exchange membrane fuel cell

Diagnosis of Membrane Electrode Assembly Degradation with Drive Cycle Test Technique

Recovery characteristics of reversible degradation for proton exchange membrane fuel cell stack under accelerated stress test

Characteristic Analysis of Fuel Cell Decay Based on Actual Vehicle Operating Conditions

Degradation Characteristics of Membrane Electrode Assembly under Drive Cycle Test Protocol

Chemical Oxidation-Induced Degradation in Gas Diffusion Layers for PEFC: Mechanisms and Performance Implications