Abstract:The proton exchange membrane (PEM) fuel cell is an ideal automotive power source with great potential, owing to its high efficiency and zero emissions. However, the durability and life-span limit its large-scale application. Complex automotive operating conditions significantly accelerate fuel cell aging, and result in diverse degradation mechanisms that require comprehensive understanding. This review focuses on three harsh conditions of open-circuit/idling, dynamic load, and startup-shutdown. In-situ and ex-situ accelerated stress tests (ASTs) for the three conditions are summarized in terms of methodology, research objectives, and conditions of application. Reversible decay may arise during ASTs and lead to an over-estimation of the aging state, of which the causes and recovery procedures are emphasized. The degradation mechanisms are elaborated systematically according to parameter characteristics, microstructure, and aging reactions. First, increased gas permeation and a high cathode potential during open-circuit/idling combine to intensify generation of free radicals that cause membrane degradation. Pt degradation and migration are also accelerated, characterized by increased Pt particle growth and precipitation in the membrane. The debate regarding the effect of Pt precipitation on membrane degradation is resolved based on a literature review. Second, dynamic load brings about changes in the thermal/humidity state, altered reactant demand, and potential cycling, which lead to mechanical degradation, gas starvation, and Pt particle growth, respectively. To account for the accelerated particle growth, electrochemical Ostwald ripening and increased Pt dissolution are reviewed. Third, an air/hydrogen boundary appears in the anode under startup-shutdown condition and causes carbon corrosion in the local cathode via the reverse current mechanism. The cathode thereby suffers from severe and non-uniform structural damage and even structural collapse, accompanied by Pt agglomeration and detachment. Meanwhile, difficulties in mass transfer arise because of ionomer redistribution, decreased porosity, and carbon surface hydrophilization. In addition, cold start produces severe damage to component structures. This paper seeks to guide further investigation into improved fuel cell durability via mechanism analysis, condition optimization, control strategy development, structural design of the membrane electrode assembly, and component material development.

Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack

Performance degradation and process engineering of the 10 kW proton exchange membrane fuel cell stack

Rapid degradation characteristics of an air‐cooled PEMFC stack

A 4750 hours' durability investigation of the PEMFC stack based on fuel cell hybrid vehicles conditions

Recovery characteristics of reversible degradation for proton exchange membrane fuel cell stack under accelerated stress test

Degradation Characteristics of Membrane Electrode Assembly under Drive Cycle Test Protocol

Degradation Study of Membrane Electrode Assembly with PTFE/Nafion Composite Membrane Utilizing Accelerated Stress Technique

Diagnosis of Membrane Electrode Assembly Degradation with Drive Cycle Test Technique

Key Components Degradation in Proton Exchange Membrane Fuel Cells: Unraveling Mechanisms through Accelerated Durability Testing

A Polymer Electrolyte Fuel Cell Life Test Using Accelerating Degradation Technique

Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions

Quantification and evolution on degradation mechanisms of proton exchange membrane fuel cell catalyst layer under dynamic testing conditions

Thermodynamic and economic study of PEMFC stack considering degradation characteristic

Research Progress of Proton Exchange Membrane Failure and Mitigation Strategies

Degradation Investigation of Electrocatalyst in Proton Exchange Membrane Fuel Cell at a High Energy Efficiency

Effect of load-cycling amplitude on performance degradation for proton exchange membrane fuel cell

Analysis of Fuel Cell Stack Performance Attenuation and Individual Cell Voltage Uniformity Based on the Durability Cycle Condition

A Semi-Empirical Voltage Degradation Model for A Low-Pressure Proton Exchange Membrane Fuel Cell Stack under Bus City Driving Cycles

Study on durability of proton exchange membrane fuel cell stack based on mesoporous carbon supported platinum catalysts under dynamic cycles conditions

Review on factors of voltage consistency and inconsistent degradation in proton exchange membrane fuel cells

Mass transfer capacity degradation of gas diffusion layer under 1000 hours real-world heavy duty load cycles