Abstract:LMP‐LCO cathodes with Mg‐doping and LMP‐LPO coating exhibit stable ultra‐high‐voltage cycling and high structural reversibility, enhancing capacity retention after long‐term cycling. The optimization of both bulk and surface leads to improved interfacial stability, changing the intrinsic electronic structure of LCO cathode materials and affecting their redox reactions. This study provides a new avenue for high‐voltage LCO batteries. Stable cycling of LiCoO2 (LCO) cathode at high voltage is extremely challenging due to the notable structural instability in deeply delithiated states. Here, using the sol–gel coating method, LCO materials (LMP‐LCO) are obtained with bulk Mg‐doping and surface LiMgPO4/Li3PO4 (LMP/LPO) coating. The experimental results suggest that the simultaneous modification in the bulk and at the surface is demonstrated to be highly effective in improving the high‐voltage performance of LCO. LMP‐LCO cathodes deliver 149.8 mAh g−1@4.60 V and 146.1 mAh g−1@4.65 V after 200 cycles at 1 C. For higher cut‐off voltages, 4.70 and 4.80 V, LMP‐LCO cathodes still achieve 144.9 mAh g−1 after 150 cycles and 136.8 mAh g−1 after 100 cycles at 1 C, respectively. Bulk Mg‐dopants enhance the ionicity of CoO bond by tailoring the band centers of Co 3d and O 2p, promoting stable redox on O2−, and thus enhancing stable cycling at high cut‐off voltages. Meanwhile, LMP/LPO surface coating suppresses detrimental surface side reactions while allowing facile Li‐ion diffusion. The mechanism of high‐voltage cycling stability is investigated by combining experimental characterizations and theoretical calculations. This study proposes a strategy of surface‐to‐bulk simultaneous modification to achieve superior structural stability at high voltages.

Three in One: Preparation of High-Performance High-Voltage LiCoO2 Cathodes Via Introducing High Concentrations of Mg Ions

Mg-Doped high voltage LiCoO2 for high performance lithium-ion batteries

High‐Entropy Surface Complex Stabilized LiCoO2 Cathode

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Ultra-thin and Mechanically Stable LiCoO2-Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

One‐Step Sintering Synthesis Achieving Multiple Structure Modulations for High‐Voltage LiCoO2

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Collective Surface Enabling an Ultralong Life of LiCoO2 at High Voltage and Elevated Temperature

LiMgPO<sub>4</sub>-Coating-Induced Phosphate Shell and Bulk Mg-Doping Enables Stable Ultra-High-Voltage Cycling of LiCoO<sub>2</sub> Cathode

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

LiMgPO4‐Coating‐Induced Phosphate Shell and Bulk Mg‐Doping Enables Stable Ultra‐High‐Voltage Cycling of LiCoO2 Cathode

Stable Cycling of LiCoO2 at 4.55 V Enabled by Combined Mg Doping and Surface Coating of NASICON-type Electrolyte

Multi-Element Synergistic Doping Enhances High-Voltage Performance of LiCoO2 Via Stabilizing Internal and Surface Structures

Unraveling the Distinct Roles of Mg Occupation on Li or Co Sites on High-Voltage LiCoO<sub>2</sub>

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances

Unraveling the Distinct Roles of Mg Occupation on Li or Co Sites on High-Voltage LiCoO 2

From Metal to Cathode Material: in situ Formation of LiCoO2 with Enhanced Cycling Performance and Suppressed Phase Transition

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Nanoscale Control and Tri-Element Co-Doping of 4.6 V LiCoO2 with Excellent Rate Capability and Long-Cycling Stability for Lithium-Ion Batteries.