Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

One‐Step Sintering Synthesis Achieving Multiple Structure Modulations for High‐Voltage LiCoO2

Off-Stoichiometry Induced Few-Nanometer Surface Layer for High-Performance Layered Cathode in Nonaqueous and Aqueous Electrolytes

Structural Evolution of Mg-Doped Single-Crystal LiCoO2 Cathodes: Importance of Morphology and Mg-Doping Sites

One-Step Sintering Synthesis Achieving Multiple Structure Modulations for High-Voltage LiCoO<sub>2</sub>

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Simultaneous Near‐Surface Trace Doping and Surface Modifications by Gas–Solid Reactions during One‐Pot Synthesis Enable Stable High‐Voltage Performance of LiCoO2

Collective Surface Enabling an Ultralong Life of LiCoO2 at High Voltage and Elevated Temperature

From Metal to Cathode Material: in situ Formation of LiCoO2 with Enhanced Cycling Performance and Suppressed Phase Transition

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Stabilizing 4.6 V LiCoO2 via Surface‐to‐Bulk Titanium Modification

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

One‐Step Surface‐to‐Bulk Modification of High‐Voltage and Long‐Life LiCoO2 Cathode with Concentration Gradient Architecture

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

Achieving structural stability of LiCoO2 at high-voltage by gadolinium decoration

Double function-layers construction strategy promotes the cycling stability of LiCoO2 under high temperature and high voltage

Three in One: Preparation of High-Performance High-Voltage LiCoO2 Cathodes Via Introducing High Concentrations of Mg Ions