Abstract:Using large-scale industrial production, such as roll-to-roll (R2R) solution printing technology, to achieve lab-to-manufacturing translation should be an inevitable process for the commercialization of organic solar cells (OSCs). Optimizing the charge transport channel to improve the charge carrier transport and suppress the charge carrier recombination in the thick active layer plays a key role in constructing efficient thick-film OSCs. Therefore, exploring the design methods of efficient and thickness-insensitive photovoltaic materials is of great importance for fabricating thick-film OSCs. In this work, we fabricated a series of all-small-molecule organic solar cells (ASM-OSCs) with varied active layer thicknesses using PC71BM as the acceptor and DRTB-T-C2 (C2) and DRTB-T-C4 (C4) with different molecular orientations as donors. Although donor compounds possess very similar absorption properties and energy levels due to the identical conjugated structures, there are considerable differences in the thickness tolerability of ASM-OSCs. With the film thickness increasing from 100 to 300 nm, the power conversion efficiencies (PCEs) of C4:PC71BM-based OSCs slightly decreased from 7.45 to 7.09%, while the PCEs of C2:PC71BM-based devices dramatically reduced from 6.99 to 5.61%. Higher face-on ratios of the C4:PC71BM blend film give an optimized charge transport channel as supported by the increased and balanced hole and electron mobilities and reduced charge recombination in the thick active layer, and an optimal PCE of 7.71% is achieved in C4:PC71BM-based devices with an active layer thickness of 230 nm. This work demonstrates that modulating the molecular orientation of photovoltaic materials via subtle side-chain tuning is a simple and effective method to optimize charge transport channels and thus attain thick-film OSCs. To the best of our knowledge, PCEs over 7% are the highest values so far observed from a thick-film ASM-OSC using a wide-band-gap (2.0 eV) small-molecule donor, making it potential in constructing highly efficient multijunction devices.

Realizing over 18% Efficiency for M-Series Acceptor-Based Polymer Solar Cells by Improving Light Utilization

Two compatible M-series acceptors form a well-mixed phase with improved exciton diffusion for efficient polymer solar cells

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Layer‐by‐Layer Processed Organic Solar Cells with 18.02% Efficiency Enabled by Regulating the Aggregation of Bottom Polymers

Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions

17.2% Efficiency for Completely Non‐Fused Acceptor Organic Solar Cells Via Re‐Intermixing Strategy in D/A Stratified Active Layer

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Modulating the Growth of Nonfullerene Acceptors Toward Efficient and Stable Organic Solar Cells Processed by High‐Boiling‐Point Solvents

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

Non‐Fully Conjugated Dimerized Giant Acceptors with Different Alkyl‐Linked Sites for Stable and 19.13% Efficiency Organic Solar Cells

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer

Thickness Insensitive Organic Solar Cells with High Figure‐of‐Merit‐X Enabled by Simultaneous D/A Interpenetration and Stratification

Optimized Charge Transport Channel Enables Thick-Film All-Small-Molecule Organic Solar Cells

Achieving 20.8% Organic Solar Cells Via Additive-Assisted Layer-by-layer Fabrication with Bulk P-I-n Structure and Improved Optical Management

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Rationally Tuning Blend Miscibility of Polymer Donor and Nonfullerene Acceptor for Constructing Efficient Organic Solar Cells

Simultaneous Improvements in Efficiency and Stability of Organic Solar Cells via a Symmetric‐Asymmetric Dual‐Acceptor Strategy

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

Rational control of sequential morphology evolution and vertical distribution toward 17.18% efficiency all-small-molecule organic solar cells

Efficient and stable organic solar cells enabled by a poly(carbazole phosphonic acid) hole transporter

Polymerized Small‐Molecule Acceptor as an Interface Modulator to Increase the Performance of All‐Small‐Molecule Solar Cells