Abstract:M-series molecules are one kind of promising acceptor-donor-acceptor (A-D-A)-type acceptors for constructing high-performance organic solar cells (OSCs). However, their power conversion efficiencies (PCEs) are lagging behind that of current state-of-the-art OSCs, limited by the relatively low fill factor (FF) and photocurrent. Herein, combined strategies of layer-by-layer (LBL) deposition and interface engineering are conducted to systematically improve light utilization and thus PCEs for M36-based OSCs. Through choosing a proper processing solvent, a PCE of 17.3% with an FF of 77.9% is achieved for the resulting LBL devices, much higher than those (15.9%/74.0%) from the blend-casting devices. The improvement is assigned to the favorable morphological evolution that facilitates carrier generation and transport as well as reduces charge recombination. More importantly, light-harvesting of the active layers can be enhanced upon employing a self-assembled monolayer of (2-(9H-carbazol-9-yl)ethyl)phosphonic acid (2PACz) instead of the widely used PEDOT:PSS as the hole-selecting layer, due to the decreased parasitic absorption of the former. Consequently, 2PACz-based LBL devices exhibit significantly increased photocurrent, affording a PCE up to 18.2%, which is the highest among the reported A-D-A-type acceptor-based OSCs. These results deliver important strategies to enhance the performance of OSCs and thus highlight the great potential of M-series acceptors for practical applications. The issue of low fill factor for M-series acceptor-based organic solar cells (OSCs) has been addressed by delicate morphology control with the layer-by-layer deposition. Meanwhile, increased photocurrent has been achieved by a self-assembled monolayer (2PACz)-based interface engineering for light management within devices. The combined strategies lead to a promising power conversion efficiency of over 18% for the M-series acceptor-based OSCs. image

17.2% Efficiency for Completely Non‐Fused Acceptor Organic Solar Cells Via Re‐Intermixing Strategy in D/A Stratified Active Layer

Achieving Organic Solar Cells with an Efficiency of 18.80% by Reducing Nonradiative Energy Loss and Tuning Active Layer Morphology

Optimizing Molecular Crystallinity and Suppressing Electron‐Phonon Coupling in Completely Non‐fused Ring Electron Acceptors for Organic Solar Cells

Tuning the Intermolecular Electrostatic Interaction toward High‐Efficiency and Low‐Cost Organic Solar Cells

Unfused-ring acceptor enabling ~12% efficiency layer-by-layer organic solar cells

Thickness Insensitive Organic Solar Cells with High Figure‐of‐Merit‐X Enabled by Simultaneous D/A Interpenetration and Stratification

Realizing over 18% Efficiency for M-Series Acceptor-Based Polymer Solar Cells by Improving Light Utilization

High‐Efficiency Organic Solar Cells Based on a Low‐Cost Fully Non‐Fused Electron Acceptor

Low-Cost Fully Non-fused Ring Acceptor Enables Efficient Organic Photovoltaic Modules for Multi-Scene Applications

Organic Solar Cells with Over 19% Efficiency Enabled by a 2D‐Conjugated Non‐fullerene Acceptor Featuring Favorable Electronic and Aggregation Structures

Easily Available High‐Performance Organic Solar Cells by Regulating Phenylalkyl Side Groups of Non‐Fused Ring Electron Acceptors

Suppressed non-radiative loss and efficient hole transfer at a small highest occupied molecular orbital offset endows binary organic solar cells with 19.73% efficiency and a small efficiency-cost gap

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

High performance and low cost organic solar cells based on pentacyclic A-DA'D-A acceptor with efficiency over 16%

20.2% Efficiency Organic Photovoltaics Employing a π‐Extension Quinoxaline‐Based Acceptor with Ordered Arrangement

Single‐Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor

Efficient and Stable Organic Solar Cells Enabled by Backbone Engineering of Nonconjugated Polymer Zwitterion Interlayers

Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions

Single‐Junction Organic Photovoltaic Cell with 19% Efficiency

Quaternary Organic Solar Cells Enable Suppressed Energy Loss

Completely Non‐fused Low‐cost Acceptor Enables Organic Photovoltaic Cells with 17% Efficiency