Abstract:Three copolymer donors, PTVT‐T‐xCl (where x = 20%, 50%, 100%), were designed and synthesized in this work. As the chlorine content increases, the Voc of PTVT‐T‐xCl‐based OSCs is enhanced, accompanied by progressively reduced non‐radiative energy losses. Notably, the OSC comprising a blend of the completely non‐fused photovoltaic materials PTVT‐T‐20%Cl and A4T‐16 achieved a remarkable PCE of 11.8%. Comprehensive Summary The industrialization of organic solar cells (OSCs) faces challenges due to complex synthesis routes and high costs of organic photovoltaic materials. To address this, we designed and synthesized a series of polythiophene‐based donor materials, PTVT‐T‐xCl (20%Cl, 50%Cl and 100%Cl), by introducing different degrees of chlorine substitution within their conjugated skeletons. The incorporation of chlorine atoms does not change the planar conformation of the conjugated main chain of the control polymer, PTVT‐T, but effectively reduces their HOMO energy levels (≤ –5.3 eV) and alters the crystallinity of the polymers. In addition, when preparing OSC by blending with non‐fused electron acceptor A4T‐16, the non‐radiative energy loss of the three photovoltaic devices gradually decreased with the increase of chlorine content (0.343, 0.278 and 0.189 eV, respectively). Notably, PTVT‐T‐20%Cl exhibited a more moderate nanoscale phase separation with the acceptor, leading to efficient exciton dissociation, lower bimolecular recombination, and thus a favorable current in the OSCs. Consequently, the photovoltaic device based on PTVT‐T‐20%Cl:A4T‐16 achieved a remarkable photovoltaic efficiency of 11.8%. In addition, the PTVT‐T‐xCl series polymers show much lower material‐only‐cost (MOC) values than the other reported photoactive material systems. This work provides the way for the development of low‐cost photovoltaic materials and the industrial application of OSC, overcoming previous limitations posed by high energy losses in polythiophene‐based donors.

Achieving Organic Solar Cells with an Efficiency of 18.80% by Reducing Nonradiative Energy Loss and Tuning Active Layer Morphology

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Chlorinated Polythiophene‐Based Donors with Reduced Energy Loss for Organic Solar Cells

Single‐Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor

Efficient ternary organic solar cells enabled by asymmetric nonfullerene electron acceptor with suppressed nonradiative recombination

18.9% Efficiency Ternary Organic Solar Cells Enabled by Isomerization Engineering of Chlorine‐Substitution on Small Molecule Donors

Improving the Efficiency of Ternary Organic Solar Cells by Reducing Energy Loss.

Tuning the Intermolecular Electrostatic Interaction toward High‐Efficiency and Low‐Cost Organic Solar Cells

High‐Efficiency Sequential‐Cast Organic Solar Cells Enabled by Dual Solvent‐Controlled Polymer Aggregation

Achieving 19.78%‐Efficiency Organic Solar Cells by 2D/1A Ternary Blend Strategy with Reduced Non‐Radiative Energy Loss

π-Extended Chlorinated Non-fullerene Acceptors Achieving High Performance Organic Solar Cells

17.2% Efficiency for Completely Non‐Fused Acceptor Organic Solar Cells Via Re‐Intermixing Strategy in D/A Stratified Active Layer

Binary Organic Solar Cells with over 19% Efficiency and Enhanced Morphology Stability Enabled by Asymmetric Acceptors

Reduced Energy Loss Enabled by a Chlorinated Thiophene‐Fused Ending‐Group Small Molecular Acceptor for Efficient Nonfullerene Organic Solar Cells with 13.6% Efficiency

Over 18% Efficiency Ternary Organic Solar Cells with 300 nm Thick Active Layer Enabled by An Oligomeric Acceptor

18.7% Efficiency Ternary Organic Solar Cells Using Two Non-Fullerene Acceptors with Excellent Compatibility

Non-fullerene acceptor with asymmetric structure and phenyl-substituted alkyl side chain for 20.2% efficiency organic solar cells

High-efficiency Organic Solar Cells with Low Voltage-Loss of 0.46 V

Over 19.2% Efficiency of Organic Solar Cells Enabled by Precisely Tuning the Charge Transfer State Via Donor Alloy Strategy

Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions

Volatilizable Solid Additive‐Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%