Abstract:Although massive progress in power conversion efficiencies (PCEs) has been made on organic solar cells (OSCs), the challenge remains to scale up high-performance OSCs that are compatible with the industrial production conditions, i.e. post-treatment-insensitive, non-halogenated solvent, large area printing, processing under atmospheric environment, etc. In this work, two A-D-A-D-A type oligomers, named 5BDDBDT-F and 5BDDBDT-Cl, were designed and synthesized to be incorporated into binary OSCs. Ex situ and in situ characterizations are performed to unveil the underlying working mechanisms. The two-phase transitions: liquid-to-liquid and liquid-to-solid can be synergistically tailored to promote the molecular arrangement of the binary blend. Benefiting from the enhanced crystallinity, oligomer can act as a bridging linker to rehabilitate the interfacial defects to reduce the trap-assisted recombination losses and thus the non-radiative recombination losses. As a result, using non-halogenated solvent (o-xylene), the best-performing OSCs with PCEs of 18.32% with a VOC of 0.850 V, a FF of 79.15% were achieved based on the PM6:5BDDBDT-F:BTP-eC9 ternary OSCs, and 18.43% with a VOC of 0.854 V, a FF of 79.29% were obtained based on PM6:5BDDBDT-Cl:BTP-eC9 ternary OSCs without any post-processing. More importantly, it is noteworthy that the large-area (1 cm2) blade coated devices based on PM6:5BDDBDT-F:BTP-eC9 and PM6:5BDDBDT-Cl:BTP-eC9, processed using non-halogenated solvent in an open-air environment without thermal-annealing treatment, obtained a high PCE of 17.11% and 17.06%, respectively, which are among the highest PCE values of blade-coated OSCs in open air. This work demonstrated an efficient strategy of controlling crystallization kinetics to improve the material crystallinity, as an effective guideline for achieving high photovoltaic performance in printing ternary OSCs, pushing the OSCs towards future manufacturing.

High‐Efficiency Sequential‐Cast Organic Solar Cells Enabled by Dual Solvent‐Controlled Polymer Aggregation

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer

Efficient organic solar cells enabled by sustainable and synergetic device engineering

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Non‐Halogenated‐Solvent Processed and Additive‐Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Vertically Optimized Phase Separation with Improved Exciton Diffusion Enables High-Efficiency Organic Solar Cells with Thick Active Layers

Simultaneously Optimizing Molecular Stacking and Phase Separation via Solvent‐Solid Hybrid Additives Enables Organic Solar Cells with over 19% Efficiency

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

Oligomeric Semiconductors Enable High Efficiency Open Air Processed Organic Solar Cells by Modulating Pre-aggregation and Crystallization Kinetics

Green‐Solvent‐Processed Organic Solar Cells with Approaching 20% Efficiency and Improved Photostability

Vertically optimized phase separation with improved exciton diffusion enables efficient organic solar cells with thick active layers

Achieving Organic Solar Cells with an Efficiency of 18.80% by Reducing Nonradiative Energy Loss and Tuning Active Layer Morphology

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Controlling Vertical Phase Separation and Crystallization via Solvent Synergy Strategy to Empower Layer-by-Layer Processed Organic Solar Cells

Asymmetric Molecule and Thermal Condition Enable Green Solvent‐Processed Organic Solar Cells Achieve 17.89% Efficiency

Layer‐by‐Layer Processed Organic Solar Cells with 18.02% Efficiency Enabled by Regulating the Aggregation of Bottom Polymers

Equally high efficiencies of organic solar cells processed from different solvents reveal key factors for morphology control

Efficient and easily repeatable organic solar cells in a high boiling point solvent by introducing a highly mixed tolerant guest acceptor

Thickness Insensitive Organic Solar Cells with High Figure‐of‐Merit‐X Enabled by Simultaneous D/A Interpenetration and Stratification

Volatilizable Solid Additive‐Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Hot‐casting Strategy Empowers High‐Boiling Solvent‐Processed Organic Solar Cells with Over 18.5% Efficiency