Abstract:The precise tuning of the active layer morphology to improve organic solar cells (OSCs) efficiency remains a key issue in the field of organic photovoltaics. Herein, a new solution to the above problem is provided by using the dual‐solvent modulated polymer‐assisted sequential spin‐coating method. Herein, the sequential spin‐coated OSCs based on the D18‐Cl/Y6 system are prepared for the first time and an efficiency of 16.38% is obtained, similar to that of bulk heterojunction OSCs. On this basis, the performance is further improved by using a dual solvent to balance the dissolution and crystallization of D18‐Cl, separately optimizing the morphology of the donor layer and allowing the subsequent spin‐coated Y6 solution to penetrate uniformly into the D18‐Cl framework. After the dual‐solvent treatment, the D18‐Cl (CF + CB)/Y6‐based device obtains a power conversion efficiency (PCE) of 17.33% and the D18‐Cl (THF + CB)/Y6‐based device achieves an even better PCE of 17.73%. It is worth noting that no post‐treatment is adopted here and after 2500 h of placement, the efficiency of the aforementioned devices is still 90% of the original. Thus, this work provides a simple method for tuning the film morphology to prepare efficient and stable devices, which is beneficial for future commercial production of OSCs. The use of the dual‐solvent‐assisted sequential spin‐coating method for precisely tuning active layer morphology to fabricate high efficient and stable organic solar cells is presented. Without any post‐treatment, D18‐Cl (THF + CB)/Y6‐based devices achieved an efficiency of up to 17.73%, thus facilitating the future commercial production of organic solar cells.

Efficient organic solar cells enabled by sustainable and synergetic device engineering

Efficient and easily repeatable organic solar cells in a high boiling point solvent by introducing a highly mixed tolerant guest acceptor

Equally high efficiencies of organic solar cells processed from different solvents reveal key factors for morphology control

Green‐Solvent‐Processed Organic Solar Cells with Approaching 20% Efficiency and Improved Photostability

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area

A guest-assisted molecular-organization approach for >17% efficiency organic solar cells using environmentally friendly solvents

Binary Organic Solar Cells with Exceeding 19% Efficiency via the Synergy of Polyfluoride Polymer and Fluorous Solvent

High‐Efficiency Sequential‐Cast Organic Solar Cells Enabled by Dual Solvent‐Controlled Polymer Aggregation

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

High-Efficiency Organic Solar Cells Processed from Real Green Solvent

Non‐Halogenated‐Solvent Processed and Additive‐Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

All green solvent and additive combination enables efficient non‐fullerene organic solar cells via sequentiao deposition strategy

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Asymmetric Molecule and Thermal Condition Enable Green Solvent‐Processed Organic Solar Cells Achieve 17.89% Efficiency

Efficient and stable organic solar cells enabled by multicomponent photoactive layer based on one-pot polymerization

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer

Investigation of tunable halogen-free solvent engineering on aggregation and miscibility towards high-performance organic solar cells

Hot Hydrocarbon‐Solvent Slot‐Die Coating Enables High‐Efficiency Organic Solar Cells with Temperature‐Dependent Aggregation Behavior

Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions

Self-assembly enables simple structure organic photovoltaics via green-solvent and open-air-printing: Closing the lab-to-fab gap

Regulating pre-aggregation in non-halogenated solvent to enhance the efficiency of organic solar cells