Abstract:Using large-scale industrial production, such as roll-to-roll (R2R) solution printing technology, to achieve lab-to-manufacturing translation should be an inevitable process for the commercialization of organic solar cells (OSCs). Optimizing the charge transport channel to improve the charge carrier transport and suppress the charge carrier recombination in the thick active layer plays a key role in constructing efficient thick-film OSCs. Therefore, exploring the design methods of efficient and thickness-insensitive photovoltaic materials is of great importance for fabricating thick-film OSCs. In this work, we fabricated a series of all-small-molecule organic solar cells (ASM-OSCs) with varied active layer thicknesses using PC71BM as the acceptor and DRTB-T-C2 (C2) and DRTB-T-C4 (C4) with different molecular orientations as donors. Although donor compounds possess very similar absorption properties and energy levels due to the identical conjugated structures, there are considerable differences in the thickness tolerability of ASM-OSCs. With the film thickness increasing from 100 to 300 nm, the power conversion efficiencies (PCEs) of C4:PC71BM-based OSCs slightly decreased from 7.45 to 7.09%, while the PCEs of C2:PC71BM-based devices dramatically reduced from 6.99 to 5.61%. Higher face-on ratios of the C4:PC71BM blend film give an optimized charge transport channel as supported by the increased and balanced hole and electron mobilities and reduced charge recombination in the thick active layer, and an optimal PCE of 7.71% is achieved in C4:PC71BM-based devices with an active layer thickness of 230 nm. This work demonstrates that modulating the molecular orientation of photovoltaic materials via subtle side-chain tuning is a simple and effective method to optimize charge transport channels and thus attain thick-film OSCs. To the best of our knowledge, PCEs over 7% are the highest values so far observed from a thick-film ASM-OSC using a wide-band-gap (2.0 eV) small-molecule donor, making it potential in constructing highly efficient multijunction devices.

Vertically Optimized Phase Separation with Improved Exciton Diffusion Enables High-Efficiency Organic Solar Cells with Thick Active Layers

Vertically optimized phase separation with improved exciton diffusion enables efficient organic solar cells with thick active layers

High‐Efficiency Organic Solar Cells with Wide Toleration of Active Layer Thickness

Sequentially Processed Bulk‐Heterojunction‐Buried Structure for Efficient Organic Solar Cells with 500 nm Thickness

Over 18% Efficiency Ternary Organic Solar Cells with 300 nm Thick Active Layer Enabled by An Oligomeric Acceptor

Thick active‐layer organic solar cells

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Optimizing Phase Separation and Vertical Distribution via Molecular Design and Ternary Strategy for Organic Solar Cells with 19.5% Efficiency

Optimized Charge Transport Channel Enables Thick-Film All-Small-Molecule Organic Solar Cells

π‐π Stacking Modulation via Polymer Adsorption for Elongated Exciton Diffusion in High‐Efficiency Thick‐Film Organic Solar Cells

Thickness Insensitive Organic Solar Cells with High Figure‐of‐Merit‐X Enabled by Simultaneous D/A Interpenetration and Stratification

High‐Efficiency Sequential‐Cast Organic Solar Cells Enabled by Dual Solvent‐Controlled Polymer Aggregation

Balancing the Molecular Aggregation and Vertical Phase Separation in the Polymer: Nonfullerene Blend Films Enables 13.09% Efficiency of Organic Solar Cells with Inkjet‐Printed Active Layer

Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

Non‐Halogenated‐Solvent Processed and Additive‐Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer

Volatilizable Solid Additive‐Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Controlling Vertical Phase Separation and Crystallization via Solvent Synergy Strategy to Empower Layer-by-Layer Processed Organic Solar Cells

Highly Efficient Organic Solar Cells Consisting of Double Bulk Heterojunction Layers