Abstract:Using large-scale industrial production, such as roll-to-roll (R2R) solution printing technology, to achieve lab-to-manufacturing translation should be an inevitable process for the commercialization of organic solar cells (OSCs). Optimizing the charge transport channel to improve the charge carrier transport and suppress the charge carrier recombination in the thick active layer plays a key role in constructing efficient thick-film OSCs. Therefore, exploring the design methods of efficient and thickness-insensitive photovoltaic materials is of great importance for fabricating thick-film OSCs. In this work, we fabricated a series of all-small-molecule organic solar cells (ASM-OSCs) with varied active layer thicknesses using PC71BM as the acceptor and DRTB-T-C2 (C2) and DRTB-T-C4 (C4) with different molecular orientations as donors. Although donor compounds possess very similar absorption properties and energy levels due to the identical conjugated structures, there are considerable differences in the thickness tolerability of ASM-OSCs. With the film thickness increasing from 100 to 300 nm, the power conversion efficiencies (PCEs) of C4:PC71BM-based OSCs slightly decreased from 7.45 to 7.09%, while the PCEs of C2:PC71BM-based devices dramatically reduced from 6.99 to 5.61%. Higher face-on ratios of the C4:PC71BM blend film give an optimized charge transport channel as supported by the increased and balanced hole and electron mobilities and reduced charge recombination in the thick active layer, and an optimal PCE of 7.71% is achieved in C4:PC71BM-based devices with an active layer thickness of 230 nm. This work demonstrates that modulating the molecular orientation of photovoltaic materials via subtle side-chain tuning is a simple and effective method to optimize charge transport channels and thus attain thick-film OSCs. To the best of our knowledge, PCEs over 7% are the highest values so far observed from a thick-film ASM-OSC using a wide-band-gap (2.0 eV) small-molecule donor, making it potential in constructing highly efficient multijunction devices.

Sequentially Processed Bulk‐Heterojunction‐Buried Structure for Efficient Organic Solar Cells with 500 nm Thickness

Vertically optimized phase separation with improved exciton diffusion enables efficient organic solar cells with thick active layers

Vertically Optimized Phase Separation with Improved Exciton Diffusion Enables High-Efficiency Organic Solar Cells with Thick Active Layers

Highly Efficient Organic Solar Cells Consisting of Double Bulk Heterojunction Layers

Thick active‐layer organic solar cells

Optimized Charge Transport Channel Enables Thick-Film All-Small-Molecule Organic Solar Cells

Printable and Large‐Area Organic Solar Cells Enabled by a Ternary Pseudo‐Planar Heterojunction Strategy

High‐Efficiency Organic Solar Cells with Wide Toleration of Active Layer Thickness

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

Over 18% Efficiency Ternary Organic Solar Cells with 300 nm Thick Active Layer Enabled by An Oligomeric Acceptor

Thickness Insensitive Organic Solar Cells with High Figure‐of‐Merit‐X Enabled by Simultaneous D/A Interpenetration and Stratification

Layer-by-layer slot-die coated high-efficiency organic solar cells processed using twin boiling point solvents under ambient condition

Highly Efficient and Stable ITO-Free Organic Solar Cells Based on Squaraine N-Doped Quaternary Bulk Heterojunction

Tailoring the Nature of Interface States in Efficient and Stable Bilayer Organic Solar Cells by a Transfer‐Printing Technique

Graded bulk-heterojunction enables 17% binary organic solar cells via nonhalogenated open air coating

High‐Efficiency Binary Organic Solar Cells Enabled by Pseudo‐Bilayer Configuration in Dilute Solution

Longitudinal Through‐Hole Architecture for Efficient and Thickness‐Insensitive Semitransparent Organic Solar Cells

π‐π Stacking Modulation via Polymer Adsorption for Elongated Exciton Diffusion in High‐Efficiency Thick‐Film Organic Solar Cells

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Solid Solvation Assisted Electrical Doping Conserves High‐Performance in 500 nm Active Layer Organic Solar Cells

High-performance organic solar cells enabled by the p-i-n structure and ternary strategy