Abstract:Besides the design and synthesis of nonfullerene acceptors, the selection of polymer donors is also critical in determining the photovoltaic performance of nonfullerene organic solar cells (OSCs). However, the selection criteria of polymer donors for nonfullerene OSCs has been rarely investigated. In this work, a novel nonfullerene acceptor (MDB) with spa-hybridized-carbon-free ladder-type skeleton was developed and used as a model compound to study the effects of miscibility and molecular ordering in determining the performance of MDB-based solar cells. In order to achieve matched energy levels and complementary absorption, three wide-bandgap polymers (PM6, T71, and P3HT) with different chemical structures were selected to blend with MDB for OSCs. The donor:acceptor miscibilities of the three blends were estimated by contact angle measurements, while their crystallinity and phase separation were investigated by grazing incidence wide-angle X-ray scattering characterization and atomic force microscopy measurement, respectively. The interfacial tension values between MDI3 and PM6, MDB and J71, as well as MDB and P3HT were determined as 0.49, 0.16, and 2.00 mN.m(-1), in that order. Owing to the proper miscibility between MDB and PM6, the resulting blend film exhibits suitable phase separation, "face-on" molecular orientation as well as compact molecular pi-pi stacking, which promotes carrier transport and suppresses bimolecular recombination. As a result, the best-performance OSC based on PM6:MDB delivered an outstanding PCE of 13.26%. In contrast, J71:MDB-based devices exhibited a lower PCE of 8.16%, due to the excessively high miscibility of J71 and MDB. As for P3HT:MDB-based devices, the poor miscibility between P3HT and MDB provides the driving force for the formation of large phase separation, which leads to an extremely low PCE of 0.45%. This work demonstrates that suitable miscibility is one of the key factors to achieve high-performance OSCs, which is an important guideline for the design and selection of next-generation photovoltaic materials.

Two compatible M-series acceptors form a well-mixed phase with improved exciton diffusion for efficient polymer solar cells

Realizing over 18% Efficiency for M-Series Acceptor-Based Polymer Solar Cells by Improving Light Utilization

Reduced miscibility between highly compatible non-fullerene acceptor and donor enables efficient ternary organic solar cells

Rationally Tuning Blend Miscibility of Polymer Donor and Nonfullerene Acceptor for Constructing Efficient Organic Solar Cells<sup>※</sup>

U‐Shaped Dimeric Acceptors for Balancing Efficiency and Stability in Organic Solar Cells

A Well‐Mixed Phase Formed by Two Compatible Non‐Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

Polyfluoride Acceptor with Limited Molecular Diffusion Enables Efficient and Stable Ternary Organic Solar Cells

Oligomer-Assisted Photoactive Layers Enable >18 % Efficiency of Organic Solar Cells

Simultaneous Improvements in Efficiency and Stability of Organic Solar Cells via a Symmetric‐Asymmetric Dual‐Acceptor Strategy

Two Compatible Polymer Donors Enabling Ternary Organic Solar Cells with a Small Nonradiative Energy Loss and Broad Composition Tolerance

18.7% Efficiency Ternary Organic Solar Cells Using Two Non-Fullerene Acceptors with Excellent Compatibility

Diffusion‐Limited Accepter Alloy Enables Highly Efficient and Stable Organic Solar Cells

Ternary Organic Solar Cells with J71 As Donor and Alloyed Acceptors Exhibiting 13.16% Efficiency

Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10.

High-Efficiency Ternary Organic Solar Cells with a Good Figure-of-Merit Enabled by Two Low-Cost Donor Polymers

Non-fullerene acceptor with asymmetric structure and phenyl-substituted alkyl side chain for 20.2% efficiency organic solar cells

Unfused-ring small molecule acceptors based on A1-D-A2-D-A1 architecture with low non-radiative energy loss and excellent air stability

Achieving high-performance ternary organic solar cells by adding a high hole-mobility non-fullerene acceptor

Terpolymerization and Regioisomerization Strategy to Construct Efficient Terpolymer Donors Enabling High‐Performance Organic Solar Cells

Efficient Organic Solar Cells from Molecular Orientation Control of M-Series Acceptors

Optimizing the power conversion processes in diluted donor/acceptor heterojunctions towards 19.4% efficiency all-polymer solar cells