Abstract:Using large-scale industrial production, such as roll-to-roll (R2R) solution printing technology, to achieve lab-to-manufacturing translation should be an inevitable process for the commercialization of organic solar cells (OSCs). Optimizing the charge transport channel to improve the charge carrier transport and suppress the charge carrier recombination in the thick active layer plays a key role in constructing efficient thick-film OSCs. Therefore, exploring the design methods of efficient and thickness-insensitive photovoltaic materials is of great importance for fabricating thick-film OSCs. In this work, we fabricated a series of all-small-molecule organic solar cells (ASM-OSCs) with varied active layer thicknesses using PC71BM as the acceptor and DRTB-T-C2 (C2) and DRTB-T-C4 (C4) with different molecular orientations as donors. Although donor compounds possess very similar absorption properties and energy levels due to the identical conjugated structures, there are considerable differences in the thickness tolerability of ASM-OSCs. With the film thickness increasing from 100 to 300 nm, the power conversion efficiencies (PCEs) of C4:PC71BM-based OSCs slightly decreased from 7.45 to 7.09%, while the PCEs of C2:PC71BM-based devices dramatically reduced from 6.99 to 5.61%. Higher face-on ratios of the C4:PC71BM blend film give an optimized charge transport channel as supported by the increased and balanced hole and electron mobilities and reduced charge recombination in the thick active layer, and an optimal PCE of 7.71% is achieved in C4:PC71BM-based devices with an active layer thickness of 230 nm. This work demonstrates that modulating the molecular orientation of photovoltaic materials via subtle side-chain tuning is a simple and effective method to optimize charge transport channels and thus attain thick-film OSCs. To the best of our knowledge, PCEs over 7% are the highest values so far observed from a thick-film ASM-OSC using a wide-band-gap (2.0 eV) small-molecule donor, making it potential in constructing highly efficient multijunction devices.

Rational control of sequential morphology evolution and vertical distribution toward 17.18% efficiency all-small-molecule organic solar cells

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Dual-Additive-Driven Morphology Optimization for Solvent-Annealing-Free All-Small-Molecule Organic Solar Cells

Design of All-Small-Molecule Organic Solar Cells Approaching 14% Efficiency via Isometric Terminal Alkyl Chain Engineering

Achieving 20.8% Organic Solar Cells Via Additive-Assisted Layer-by-layer Fabrication with Bulk P-I-n Structure and Improved Optical Management

Isomerization Engineering of Solid Additives Enables Highly Efficient Organic Solar Cells via Manipulating Molecular Stacking and Aggregation of Active Layer

All-small-molecule Organic Solar Cells with over 14% Efficiency by Optimizing Hierarchical Morphologies

Miscibility Regulation and Thermal Annealing Induced Hierarchical Morphology Enables High‐Efficiency All‐Small‐Molecule Organic Solar Cells Over 17%

Efficiency Boost in All‐Small‐Molecule Organic Solar Cells: Insights from the Re‐Ordering Kinetics

Morphology Controlling of All‐Small‐Molecule Organic Solar Cells: from Donor Material Design to Device Engineering

Modulating Molecular Orientation Enables Efficient Nonfullerene Small-Molecule Organic Solar Cells

Achieving 10% efficiency in non-fullerene all-small-molecule organic solar cells without extra treatments

Optimized Charge Transport Channel Enables Thick-Film All-Small-Molecule Organic Solar Cells

Regulating the reorganization energy and crystal packing of small-molecule donors enables the high performance of binary all-small-molecule organic solar cells with a slow film growth rate

Manipulating Molecular Organization in High-Efficiency Organic Solar Cells

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Controlling Vertical Phase Separation and Crystallization via Solvent Synergy Strategy to Empower Layer-by-Layer Processed Organic Solar Cells

Optimized Active Layer Morphology Toward Efficient and Polymer Batch Insensitive Organic Solar Cells

Optimization of Charge Management And Energy Loss in All‐Small‐Molecule Organic Solar Cells

All‐Small‐Molecule Organic Solar Cells with Efficiency Approaching 16% and FF over 80%

Additive-Induced Vertical Component Distribution Enables High-Performance Sequentially Cast Organic Solar Cells.