Abstract:Due to the excellent material properties of crystal quartz and its simple and effective structure, the quartz double ended tuning fork (DETF) is widely used as a resonance sensing element in resonator sensors, where its quality factor has an important effect on the overall accuracy and stability of such sensors. To optimise the quality factor of quartz DETF, the influence of structural dimensions on structural and air damping is analysed, and the theoretical model used to calculate the quality factor is summarised. Further, under the premise of fabricating resonators with sufficient force–frequency sensitivity, the quality factors of quartz DETFs of different structural dimensions are simulated through finite element simulation. The theoretical model and simulation calculation of the quality factor of quartz DETFs mutually verify its effectiveness. Moreover, an experimental platform was built, and three quartz DETFs with different dimensions were fabricated to test their quality factor. The quality factors of the three DETFs in air and vacuum are 3467.3, 1925.8, 4442.4 and 32 997.6, 11 559.1, 24 795.7, respectively, which means that the environmental factors and their structural dimensions have a great influence on quality factor. With the simulation method and summarised theoretical model in this paper, the quality factor was studied with comprehensive structural damping (thermal damping loss and support loss) and air damping (resistance damping, slide film damping, and squeeze film damping). The influence of the structure size on the quality factor was analysed in detail, including the length of the decoupling region, the distance between the tines, and the length and width of the tines, and the main influencing factors were obtained, providing a basic and comprehensive reference for designing quartz DETF.

Exploring the Dissipation Parameter of Quartz Crystal Resonator under 3-Overtone Mode

Investigation of Q Factor of the QCM Resonator under Overtone Modes.

Convergence of Dissipation and Impedance Analysis of Quartz Crystal Microbalance Studies

A wireless-electrodeless quartz crystal microbalance with dissipation DMMP sensor

Simple Dissipative Quartz Crystal Microbalance and Methods for Determining Dissipation Decay Constants

Exploration of the Mass Sensitivity of Quartz Crystal Microbalanceunder Overtone Modes Using Electrodeposition Method

Basic Principles of QCM-D

Quartz crystal microbalance based on torsional piezoelectric resonators.

A Theoretical Analysis of Mechanical Dissipation of an Electroded Quartz Resonator

Method for QCM Resonator Device Equivalent Circuit Parameter Extraction and Electrode Quality Assessment

Study on Quality Factor of the Ring Electrode QCM Resonator

Thickness shear mode quartz crystal resonators with optimized elliptical electrodes

Analysis of Quality Factor of the Quartz Crystal Resonator with N-M Asymmetric Electrodes

The Quality Factor of Quartz DETF for Resonant Sensors: Simulation, Analysis and Verification

Analysis on the acoustic-load sensitivity of quartz crystal resonator

Overtone Mass Sensitivity of Quartz Crystal Microbalance Sensor with Asymmetric N-M Type Electrode Configuration.

Applications and Outlooks of Quartz Crystal Microbalance in Studies of Polymer Thin Films

Experimental verification of the characteristic damping theory of the quartz crystal sensors

Study For The Quartz Resonator Force Sensor With Energy Trapping Theory

Thickness-shear Frequencies of an Infinite Quartz Plate with Material Property Variation Along the Thickness

Frequency-Temperature Relations of Novel Cuts of Quartz Crystals for Thickness-Shear Resonators