Abstract:Due to the excellent material properties of crystal quartz and its simple and effective structure, the quartz double ended tuning fork (DETF) is widely used as a resonance sensing element in resonator sensors, where its quality factor has an important effect on the overall accuracy and stability of such sensors. To optimise the quality factor of quartz DETF, the influence of structural dimensions on structural and air damping is analysed, and the theoretical model used to calculate the quality factor is summarised. Further, under the premise of fabricating resonators with sufficient force–frequency sensitivity, the quality factors of quartz DETFs of different structural dimensions are simulated through finite element simulation. The theoretical model and simulation calculation of the quality factor of quartz DETFs mutually verify its effectiveness. Moreover, an experimental platform was built, and three quartz DETFs with different dimensions were fabricated to test their quality factor. The quality factors of the three DETFs in air and vacuum are 3467.3, 1925.8, 4442.4 and 32 997.6, 11 559.1, 24 795.7, respectively, which means that the environmental factors and their structural dimensions have a great influence on quality factor. With the simulation method and summarised theoretical model in this paper, the quality factor was studied with comprehensive structural damping (thermal damping loss and support loss) and air damping (resistance damping, slide film damping, and squeeze film damping). The influence of the structure size on the quality factor was analysed in detail, including the length of the decoupling region, the distance between the tines, and the length and width of the tines, and the main influencing factors were obtained, providing a basic and comprehensive reference for designing quartz DETF.

Study on Quality Factor of the Ring Electrode QCM Resonator

Analysis of Quality Factor of the Quartz Crystal Resonator with N-M Asymmetric Electrodes

Investigation of Q Factor of the QCM Resonator under Overtone Modes.

Method for QCM Resonator Device Equivalent Circuit Parameter Extraction and Electrode Quality Assessment

High Quality-Factor Quartz Tuning Fork Glass Probe Used In Tapping Mode Atomic Force Microscopy For Surface Profile Measurement

Convergence of Dissipation and Impedance Analysis of Quartz Crystal Microbalance Studies

The Quality Factor of Quartz DETF for Resonant Sensors: Simulation, Analysis and Verification

High-quality-factor photonic crystal ring resonator.

Exploring the Dissipation Parameter of Quartz Crystal Resonator under 3-Overtone Mode

A Three Million Q Factor Tuning Fork Resonator Based on a Vibration Isolation Structure

Quartz crystal microbalance based on torsional piezoelectric resonators.

Reducing Intrinsic Energy Dissipation in Diamond-on-diamond Mechanical Resonators Toward One Million Quality Factor

The Modified Design of Ring Electrode Quartz Crystal Resonator for Uniform Mass Sensitivity Distribution

High quality factor Si 3 N 4 ring resonators achieved by surface roughness reduction

Six million Q factor micro fused silica shell resonator with teeth-like tines released by femtosecond laser-assisted chemical etching

A micro resonant pressure sensor with adjustable quality factor

Exploration of the Mass Sensitivity of Quartz Crystal Microbalanceunder Overtone Modes Using Electrodeposition Method

Fabrication and Characterization of a High Q-Factor Microcantilever Enhanced by Lead Zirconate Titanate Thick Film

Design and Analysis of Quartz Crystal Microbalance with a New Ring-Shaped Interdigital Electrode

Analysis on the Force?frequency Coefficient and Thermal Elastic Quality Factor for Quartz Double Ended Tuning Fork

High Quality Factor PECVD Si3N4 Ring Resonators Compatible with CMOS Process