Abstract:Acoustic gravimetric biosensors attract attention due to their simplicity, robustness, and low cost. However, a prevailing challenge in these sensors is dissipation which manifests in a low quality factor (Q-factor), which limits their sensitivity and accuracy. To mitigate dissipation of acoustic sensors in liquid environments we introduce an innovative approach in which we combine microfluidic channels with gravimetric sensors. To implement this novel paradigm we chose the quartz crystal microbalance (QCM) as our model system, owing to its wide applicability in biosensing and the relevance of its operating principles to other types of acoustic sensors. We postulate that the crucial determinant for enhancing performance lies in the ratio between the width of the microfluidic channels and the wavelength of the pressure wave generated by the oscillating channel side walls driven by the QCM. Our hypothesis is supported by finite element analysis (FEA) and dimensional studies, which revealed two key factors that affect device performance: (1) the ratio of the channel width to the pressure wavelength ( W / λ p ) and (2) the ratio of the channel height to the shear evanescent wavelength ( H / λ s ). To validate our hypothesis, we fabricated a microfluidic QCM (µ-QCM) and demonstrated a remarkable 10-fold improvement in its dissipation when compared to conventional QCM. The novel microfluidic approach offers several additional advantages, such as direct data interpretation, reduced volume requirement for sample liquids, and simplified temperature control, augmenting the sensor's overall performance. By fostering increased sensitivity, accuracy, and ease of operation, our novel paradigm unlocks new possibilities for advancing gravimetric technologies, potentially for biosensing applications.

Analysis of Quality Factor of the Quartz Crystal Resonator with N-M Asymmetric Electrodes

Study on Quality Factor of the Ring Electrode QCM Resonator

Method for QCM Resonator Device Equivalent Circuit Parameter Extraction and Electrode Quality Assessment

Overtone Mass Sensitivity of Quartz Crystal Microbalance Sensor with Asymmetric N-M Type Electrode Configuration.

Convergence of Dissipation and Impedance Analysis of Quartz Crystal Microbalance Studies

High Quality-Factor Quartz Tuning Fork Glass Probe Used In Tapping Mode Atomic Force Microscopy For Surface Profile Measurement

Investigation on Mass Sensitivity of N-M Type Electrode Quartz Crystal Microbalance

Investigation of Q Factor of the QCM Resonator under Overtone Modes.

A wireless-electrodeless quartz crystal microbalance with dissipation DMMP sensor

Exploration of the Mass Sensitivity of Quartz Crystal Microbalanceunder Overtone Modes Using Electrodeposition Method

Reducing Intrinsic Energy Dissipation in Diamond-on-diamond Mechanical Resonators Toward One Million Quality Factor

Quartz crystal microbalance based on torsional piezoelectric resonators.

Thickness shear mode quartz crystal resonators with optimized elliptical electrodes

Applications and Outlooks of Quartz Crystal Microbalance in Studies of Polymer Thin Films

Unveiling the tradeoff between device scale and surface nonidealities for an optimized quality factor at room temperature in 2D MoS2 nanomechanical resonators

High Quality Factors in Superlattice Ferroelectric Hf 0.5 Zr 0.5 O 2 Nanoelectromechanical Resonators

Microfluidic QCM enables ultrahigh Q-factor: a new paradigm for in-liquid gravimetric sensing

Design and Analysis of Quartz Crystal Microbalance with a New Ring-Shaped Interdigital Electrode

A micro resonant pressure sensor with adjustable quality factor

A Winding-Frame-Structure Thin-Film MEMS Resonator for Quality Factor Improvement

Equivalent Electromechanical Model for Quartz Tuning Fork Used in Atomic Force Microscopy