Abstract:The p–i–n photocathode architectures for Sb2(S, Se)3 devices are rarely reported as growth of Sb2(S, Se)3 strongly depends on the substrate. Herein, a comparison between three hole‐transporting layers as the underlying substrate reveals the superior properties of CuI over CuS and NiO. The improvement is attributed to the compact morphology of the Sb2(S, Se) films. Sb2(S, Se)3 is a promising photocathode for photoelectrochemical (PEC) conversion of solar energy to hydrogen due to its excellent optoelectronic properties, stability, and low toxicity. For such applications, a p–i–n device architecture is favorable for efficient charge separation, with the p‐type layer improving hole extraction while the n‐type layer facilitates electron injection into the electrolyte for hydrogen evolution reaction. However, the lack of suitable p‐type layers for depositing a uniform layer of Sb2(S, Se)3 photocathode constrains the device architectures for PEC water splitting. In this work, various p‐type materials (e.g., NiO, CuS, and CuI) are investigated. Photocathodes fabricated on CuI demonstrate superior performance due to improved hole extraction and uniform growth of Sb2(S, Se)3 absorber layer. The Se/S ratio is adjusted to further fine‐tune the photocathode's absorption, influencing the efficiency of charge carriers' injection and separation. The overall PEC performance reaches the maximum value when Se/S = 20%, achieving up to 4.2 mA cm−2 with stable photocurrents sustained for 120 min under standard illumination conditions, achieving the highest‐reported photocurrent among S‐rich‐solution‐processed Sb2(S, Se)3 photocathodes. In this work, new avenues are opened for the design of p–i–n Sb2(S, Se)3 PEC devices.

Nanowire Morphology Control in Sb Metal-derived Antimony Selenide Photocathodes for Solar Water Splitting

Constructing lateral sulfur-gradient Sb2(SxSe1-x)3 heterostructures for Sb2Se3 nanorod photocathodes with enhanced photoelectrochemical properties

Crystallographic orientation and morphology control of Sb2Se3 to sensitize TiO2 nanotube arrays for enhanced photoelectrochemical performances

Epitaxial growth strategy for construction of Tm 3+ doped and [hk1] oriented Sb 2 S 3 nanorods S-scheme heterojunction with enhanced photoelectrochemical performance

A Stable and Efficient Photocathode Using an Sb2S3 Absorber in a Near-Neutral Electrolyte for Water Splitting

Colloidal synthesis of SnS nanocrystals with dimension-dependent photoelectrochemical properties

In-Sb Covalent Bonds over Sb2Se3/In2Se3 Heterojunction for Enhanced Photoelectrochemical Water Splitting

Controlled Growth of 3D CdS-Branched ZnO Nanorod Arrays for Efficient Solar Driven Photoelectrochemical Water Splitting

One-step Hydrothermal Synthesis of Sn-doped Sb2Se3 for Solar Hydrogen Production

Unveiling the Dual Impact of CuI Layer and Se Content in Sb2(S, Se)3 Photocathodes for Solar Water Splitting

FeOOH decorated Sb2Se3@Cd Zn1-S core-shell nanorod heterostructure photocathode for enhancing photoelectrochemical performance

Nanorod array-induced growth of high-quality Sb2Se3 absorber layers for efficient planar solar cells

In-situ construction of novel Sb2(S,Se)3/CdSe S-scheme heterojunction with enhanced photoelectrochemical performance

Crystallographic Orientation Control of 1D Sb 2 Se 3 Nanorod Arrays for Photovoltaic Application by In Situ Back‐Contact Engineering

Crystal Growth Promotion and Interface Optimization Enable Highly Efficient Sb2se3 Photocathodes for Solar Hydrogen Evolution

Controlled growth of vertically aligned ultrathin In 2 S 3 nanosheet arrays for photoelectrochemical water splitting.

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

CdxZn1-xS/Sb2Se3 thin film photocathode for efficient solar water splitting

Heterojunction nanochannel arrays based on SiC Core–TiO2 shell for efficiently enhanced photoelectrochemical water splitting

General In Situ Photoactivation Route with IPCE over 80% toward CdS Photoanodes for Photoelectrochemical Applications