Abstract:Sb2Se3 is an emerging and promising light-absorbing material with superior photovoltaic properties. However, the specific one-dimensional structure of Sb2Se3 limits the doping density, preventing a high built-in potential. Moreover, in the superstrate devices the back contact is often non-ohmic. In this work, we have successfully applied tungsten oxide (WO3-x) as a hole-transport layer in superstrate n-i-p Sb2Se3 solar cells. It is found that an interfacial dipole is formed at Sb2Se3/WO3-x interface via Sb–W bonds, which reduces the barrier for hole extraction. Meantime, gap states are present at a suitable energy level to serve as intermediate states for hole-transport from the Sb2Se3 absorber to the metal anode. In addition, the introduction of WO3-x can suppress carrier recombination at the back interface, enhance the built-in potential, and improve the spectral response in the long-wavelength region. Consequently, the superstrate devices with the incorporated WO3-x layer achieve a champion efficiency of 7.10% due to the enhancement of all device parameters. Furthermore, the all-inorganic devices with WO3-x hole-transport layer exhibit excellent air stability and thermal stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10629?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10629</a>.XPS, SEM of WO3-x films; Tauc plots for band gap calculation of WO3-x film; integrated Jsc; current density–voltage (J–V) curves measured in both forward and reverse scan directions; dV/dJ with the fit used to determine R; cross-sectional SEM and AFM of Sb2Se3 films covered with WO3-x layers; the Voc, Jsc, and FF evolution (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10629/suppl_file/am0c10629_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Crystallographic Orientation Control of 1D Sb 2 Se 3 Nanorod Arrays for Photovoltaic Application by In Situ Back‐Contact Engineering

Nanorod array-induced growth of high-quality Sb2Se3 absorber layers for efficient planar solar cells

Vertically Aligned One-Dimensional Crystal-Structured Sb 2 Se 3 for High-Efficiency Flexible Solar Cells via Regulating Selenization Kinetics

Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries

Critical Review on Crystal Orientation Engineering of Antimony Chalcogenide Thin Film for Solar Cell Applications

Heterostructured CdS Buffer Layer for Sb2Se3 Thin Film Solar Cell

Back Contact Interfacial Modification in Highly-Efficient All-Inorganic Planar n-i-p Sb 2 Se 3 Solar Cells

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Interpenetrating structure for efficient Sb2Se3 nanorod array solar cells loaded with CuInSe2 QDs sensitizer

Crystallographic orientation and morphology control of Sb2Se3 to sensitize TiO2 nanotube arrays for enhanced photoelectrochemical performances

Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: Morphology, carrier transport and photovoltaic performance

Management of Light Absorption Based on Sidewall Reflection for Fabricating High-Performance Flexible Nano-Coned Sb2Se3 Thin Film Photovoltaics

Orientation control of close-spaced sublimation processed Sb2S3 thin films for efficient and stable planar solar cells

Heteroepitaxial and homoepitaxial nucleation strategies to grow Sb2S3 nanorod arrays and therefrom a derived gain of 7.18%-efficient Sb2(S,Se)3 quasi-nanoarray heterojunction solar cells

Quasi-Vertically Oriented Sb 2 Se 3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 mV Prepared via Close-Space Sublimation and Selenization

Enhancing the photovoltaic properties of SnS-Based solar cells by crystallographic orientation engineering

Selective preferred orientation for high-performance antimony selenide thin-film solar cells via substrate surface modulation

Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells

Enhanced Performance of the Sb 2 Se 3 Thin-Film Solar Cell by Organic Molecule-Induced Crystallization and Suppression of the Interface Recombination