Abstract:We investigated an electrodeposition technique for fabricating a high-strength thin metallic foil as a current collector material in secondary batteries. To increase the strength and minimize the increase in electrical resistivity, copper–nickel (Cu–Ni) double-layered foils were considered and the grain structures of each layer were manipulated by controlling the electrodeposition solution and process conditions. Initially, a Cu electrodeposition process was developed to form a bamboo-like grain structure after annealing, which was followed by two Ni processes to produce a foil with a columnar or nano-crystalline grain structure. Subsequently, several foils were annealed at 190 °C for 10 min considering that current collectors experience a thermal load during battery manufacturing. Scanning and transmission electron microscopy-based crystallographic orientation mapping techniques indicated a remarkable change in the grain structure of the Cu foil owing to the grain growth after annealing; conversely, the Ni foil with the nano-crystalline grain structure was insensitive to annealing. By applying these processes to each material, four 10-μm-thick double-layered foils were fabricated. Among these foils, the foil with a nano-crystalline Ni layer exhibited the smallest change in material properties resulting in the highest tensile strength and moderate elongation after annealing. The tensile strength of the best double-layered foil was approximately three-fold higher than that of the single-layered Cu foil after annealing. Graphical

Preparation Techique of Foamed Nickel by Electrodeposition

Preparation and Sodium Storage Performance of Iron-Nickel Prussian Blue Electrode Material

Preparation and corresponding structure of nickel foam

RESEARCH ON PREPARATION OF NICKEL POWDER BY ELECTROLYTIC DEOXIDATION FROM NiO

Effect of Preparation Condition on Electrochemical Property of Nano-Nickel Powders

Preparation of Electrodeposited Foam Fe-Ni Alloy Coating with Low Content of Nickel

Froth Floatation Integrated into Electrodeposition to Prepare Ni/Short Carbon Fibers Composites with Network and Sheet Structures

A Facile Electrochemical Lithiation Method to Prepare Porous Nickel Oxide Electrodes with High Electrochromic Performance

Investigation of In-Situ Polymerization Synthesized Carbon-Coated Zinc Oxide As Anode Material for Zn/Ni Secondary Battery

Relationship Between Tensile Strength and Preparation Conditions for Nickel Foam

Progess in preparing nano-phase nickel hydroxide used for battery and its application

Preparation of Ultra-Fine Nickel by Electrochemical Milling Method

Role of various pretreatment processes in electroless nickel deposition on TiH2 particles with a simple plating bath

Preparation Of Nickel Foam Supported Fe2o3@Ni3s2 Nanowires Network Electrode And Electrocatalytic Oxygen Evolution Performance

Preparation Methods and Development Tendency of Ultrafine Nickel Powder Applicated in Conductive Pastes

Preparation of Hollow Nickel Fibres by Electroless-Plating Technique

Improving electrochemical performance of NiO films by electrodeposition on foam nickel substrates

Electrochemical Performances of Nanostructured Ni3P–Ni Films Electrodeposited on Nickel Foam Substrate

Cobalt Electroplating on Nickel Foam to Improve Performance of Nickel Positive Electrode

Facile Synthesis of Nickel Nanofoam Architectures for Applications in Li‐Ion Batteries

Microstructure-controlled Electrodeposition of Mechanically Reliable Double-layered Thin Foils for Secondary Batteries