Abstract:The interface structure and infiltration effect between reinforcement (CFs) and Al matrix have a significant impact upon comprehensive properties of the resulting carbon-fibre-reinforced Al matrix (CF/Al) composites. In present study, Ni coatings with different thicknesses were evenly coated onto carbon fibres (CFs) via electroplating for the purpose of promote the interface combining effect and reduce adverse interfacial reaction betwixt CFs and Al matrix. The influence of pH value (2, 3, 4, 5, 6), current density (0.1 A, 0.2 A, 0.3 A, 0.4 A, 0.5 A, 0.6 A), electroplating time (2 min, 4 min, 6 min) on surface appearance and tensile strength of Ni-coated CFs were discussed. The results show that the Ni-coated CFs with excellent integrity and mechanical properties was obtained at a current density of 0.4 A and a pH of 5. Subsequently, twin-roll casting and T6 heat treatment process were used to fabricate CF/Al composites with varying Ni coating thicknesses. Using SEM, TEM and tensile property testing, the impact of Ni coating thickness (0 μm, 0.35 μm, 0.58 μm, 0.76 μm) on interfacial microstructures and mechanical characteristics of CF/Al composites were examined. The results exhibit that the 0.76 μm Ni-coated CF/Al composites exhibit best UTS and elongation of 151.6 MPa and 11.7 %, respectively. This is due to a thicker Ni coating preventing the CFs against reaction with Al matrix during processing the composites, which reduces the generation of Al 4 C 3 phase. However, when the coating thickness is 0.35 μm, adverse chemical interactions occur at interface of Al-CFs, leading to the formation of an Al 4 C 3 phase. Finally, the strengthening mechanism of Ni-coated CF/Al composites was analyzed, and its strengthening model was established. This study can provide a pratical route to prepare and applicate the high-quality continuous CF/Al composites.

Relationship Between Tensile Strength and Preparation Conditions for Nickel Foam

Preparation and corresponding structure of nickel foam

Investigation of Tensile Properties and In Situ Analysis of Fracture Behavior in High-Porosity Open-Cell Nickel Foam

Effect of Preparation Condition on Electrochemical Property of Nano-Nickel Powders

Evaluation of the Electromagnetic Characteristics on Ag/NiCuZn Ferrite Sintered Bodies

A Study on the Surface Oxidation Pretreatment and Nickel Plating Mechanism of Carbon Fiber

Preparation of Hollow Nickel Fibres by Electroless-Plating Technique

Effects of Ni Foil Thickness on the Microstructure and Tensile Properties of Reaction Synthesized Multilayer Composites

Preparation of Super-Aligned Carbon Nanotube-Reinforced Nickel-Matrix Laminar Composites with Excellent Mechanical Properties

Synthesis and Characterization of Graphite Nanofibers Deposited on Nickel Foams

Study of Oxidation-Resistant NiCrAl–Al Coatings Co-Deposited by Electrophoresis on Nickel Foams

Properties and microstructure of nickel/graphite composites fabricated by electroless nickel plating and spark plasma sintering

Effect of Ni foam addition on the microstructure and mechanical properties of In–48Sn eutectic alloy

Influence of heat treatment on microstructure evolution and yield surfaces of Ni/PU hybrid foams

Effect of surface modification on interfacial microstructures and mechanical properties of continuous CF/Al composites

Nickel Sulfide Modified NiCu Nanoalloy with Excellent Oxygen Evolution Reaction Properties Prepared through Electrospinning and Heat Treatment

Feasible evolution process of tensile property dominant effect factor in annealed high purity nickel by a combination of in situ tensile technique and EBSD

Study on Adhesion Properties and Process Parameters of Electroless Deposited Ni-P Alloy for PEEK and Its Modified Materials

Optimization of the Preparation Parameters of High-Strength Nickel Layers by Electrodeposition on Mild Steel Substrates

Conformation and Microstructure of Carbon Nanofibers Deposited on Foam Ni

Solving the Bonding Problem of the Ni Thin Coating with the Ultrasonic Assisted Electrochemical Potential Activation Method