Abstract:Metal foils are used for packaging and decoration, and gold leaf down to 0.1 mu m thickness has been made since ancient Egyptian times. The chemical inertness of gold, causing non-stickiness, and its malleability, underlie the success of "Goldbeating". In contrast, lithium metal is extremely reactive and sticks to rollers as well as degrades in air. How to make one-to-few mu m thick, large-area lithium foil is a key challenge for the battery industry, as such foils can provide extraordinarily longer cycle life to rechargeable batteries when standard anodes such as graphite or silicon are prelithiated right before cell assembly, by mechanically pressing the thin foil to the anode. Here, we show that the addition of a small alloy-element on the order of 1 at% to the body-centered cubic (BCC) phase drastically changes the oxidized surface layer composition, making the Li alloy much less sticky towards the rolling machine. By forming a protective passivation layer, the air stability is dramatically enhanced, so it can be stored for up to 12 hours without significant performance degradation. Also, there is a 10x strengthening effect, making the sheet much less prone to ductile rupture damage during rolling, while maintaining malleability. As a result, we are able to fabricate large-area lithium foil in a roll-to-roll manner down to 1 mu m thickness. Such an ultra-thin Li foil anode demonstrates superior electrochemical performance directly in pouch cells (>320 W h kg(-1)), in which the 0.8 A h pouch-cell achieved a 100 cycle life under lean electrolyte conditions of 2.67 g A h(-1). Furthermore, we applied 5 mu m Li to graphite prelithiation, having an extra 1 mA h cm(-2) lithium inventory (the amount of cyclable lithium in a full cell), the capacity of the LFP//graphite full cell increases by 18%, with an average coulombic efficiency of >99.99% over more than 300 cycles.

Microstructure-controlled Electrodeposition of Mechanically Reliable Double-layered Thin Foils for Secondary Batteries

Rotary Electrodeposition of High-Strength Nanotwinned Copper Foils

High-efficiency and low-consumption preparation of ultra-thin and high-performance nanotwinned copper foils by high-gravity intensified direct current electrodeposition

Development of electroforming technology for flexible metal substrates for high-efficiency double-sided electronic devices

Controlling the Microstructure of Cobalt-Free, High-Nickel Cathode Materials with Dopant Solubility for Lithium-Ion Batteries

Mechanical Properties and Microstructure of Rolled and Electrodeposited Thin Copper Foil

Non-sticky Li-alloy leaves for long-lasting secondary batteries

Enhancing Durability and Capacity Retention of Ultrafine-Grained Aluminum Foil Anodes in Lithium-Ion Batteries

Nanostructured Composite Foils Produced Via Accumulative Roll Bonding as Lithium-Ion Battery Anodes

Controlled fabrication and electrochemical corrosion behavior of ultrathin Ni-Cu alloy foil

Combining Solid Solution Strengthening and Second Phase Strengthening for Thinning Li Metal Foils

Single-material Aluminum Foil As Anodes Enabling High-Performance Lithium-Ion Batteries: the Roles of Prelithiation and Working Mechanism

Preparation, micro-structure and characterization of high strength and low profile lithium copper foil with SPS and HP additives

Thin films of lithium manganese oxide spinel as cathode materials for secondary lithium batteries

Electroforming as a Novel One-Step Manufacturing Method of Structured Aluminum Foil Current Collectors for Lithium-Ion Batteries

Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode

High-strength copper foil prepared with 2-mercaptothiazoline by direct current electrodeposition

Silicon Composite Thick Film Electrodeposited on A Nickel Micro-Nanocones Hierarchical Structured Current Collector for Lithium Batteries

Artificial Thiophdiyne Ultrathin Layer as an Enhanced Solid Electrolyte Interphase for the Aluminum Foil of Dual-Ion Batteries

Artificial Thiophdiyne Ultrathin Layer as Enhanced Solid Electrolyte Interphase for the Aluminum Foil of Dual-Ion Batteries.

A Novel Mechanically Robust Leaf-Shaped Tin Dioxide Li-Ion Battery Anode and Its Dynamic Structural Transformation and Electron-Transfer Simulation