Abstract:Low temperature oxide formation is an important process in the fabrication of thin-film transistors (TFT) used in active-matrix liquid crystal displays. However, low temperature oxide is prone to have defects at the SiO2/polycrystalline–SiGe interfaces. We have recently developed a novel rf (radio frequency) plasma oxidation method for polycrystalline SiGe (poly-SiGe) materials. The poly-SiGe wafers are oxidized in an oxygen rf plasma with the samples electrically floating. That is, the sample voltage is the same as the sheath potential of the floating wall and is always negative with respect to the bulk of the plasma since electrons have higher mobility than ions. The slightly negative potential on the wafers attracts low energy oxygen ions from the plasma and the resulting damage on the wafers is thus lower than that induced by the more commonly used and energetic electron cyclotron resonance (ECR) source. No deliberate heating is applied during oxidation since the samples are heated spontaneously by the plasma, but the temperature is measured to be below 100 °C throughout the entire process. The oxidation rate is comparable to that of ECR plasma oxidation. Depth profiles are acquired by Auger electron spectroscopy and the interfaces are examined by x-ray photoelectron spectroscopy. The n-channel metal oxide silicon device fabricated on the as-grown gate oxide shows good electrical characteristics. The process is thus compatible with inexpensive large-area, low-temperature fabrication of TFTs on glass substrates.

Room-Temperature Direct Bonding Using Fluorine Containing Plasma Activation

Research on Silicon-Glass Direct Bonding at Room Temperature

Mechanisms for room temperature direct wafer bonding

Low Temperature Hydrophilic SiC Wafer Level Direct Bonding for Ultrahigh-Voltage Device Applications

Research on Silicon-Glass Thermal Bonding with SiO2 Film Assist

Direct wafer bonding of Ga2O3–SiC at room temperature

Floating Low-Temperature Radio-Frequency Plasma Oxidation of Polycrystalline Silicon-Germanium

Room temperature wafer bonding through conversion of polysilazane into

Effect of Combined Hydrophilic Activation on Interface Characteristics of Si/Si Wafer Direct Bonding

Mechanisms for low-temperature direct bonding of Si/Si and quartz/quartz via VUV/O3 activation

Time‐Dependent Surface Properties and Wafer Bonding of O 2 ‐ Plasma ‐ Treated Silicon (100) Surfaces

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Room temperature bonding of diamond/Si with Mo/Au interlayers in atmospheric air

Hybrid bonding of GaAs and Si wafers at low temperature by Ar plasma activation

Low temperature Cu/SiO 2 hybrid bonding via 〈1 1 1〉-oriented nanotwinned Cu with Ar plasma surface modification

Low Temperature Cu/SiO2 Hybrid Bonding with Protruding Copper Pads

Low-temperature Cu/SiO 2 hybrid bonding based on Ar/H 2 plasma and citric acid cooperative activation for multi-functional chip integration

Low Temperature Silicon Wafer‐to‐Wafer Bonding with Nickel Silicide

Investigation of Plasma Activated Si-Si Bonded Interface by Infrared Image Based on Combination of Spatial Domain and Morphology

A Model of Low‐Temperature Wafer Bonding And Its Applications

Low‐temperature bonding of glasses: The role of plasma‐engrafted surface amino groups