Abstract:In this study, a novel sol-gel method is used to synthesize amorphous silica-alumina materials with a narrow mesoporous distribution and various Si/Al molar ratios without using any templates and pore-regulating agents. During the preparation procedure, only inexpensive inorganic salts were used as raw materials, instead of expensive and harmful alkoxides. The precursor sol was dried at room temperature in a vacuum box kept at 60 mmHg until it began to form the gel. The results of a nitrogen sorption experiment indicate that the synthesized materials with different Si/Al molar ratios have similar mesoporous distributions (within 2-12 nm). Moreover, it was found that the material's pore size distribution remains at a similar value during the heat treatment from room temperature to 550 degreesC. On the basis of the nitrogen sorption, TEM, and AFM characterization results, a formation mechanism of mesopores which accounts for the experimental data is also suggested. This suggested mechanism involves rearrangement of the primary particles during the drying process to form the precursors of the similarly sized mesopores. The synthesized materials were characterized by XRD, thermal analysis (TG/DTA), Al-27 and Si-29 MAS NMR spectroscopy, SEM, TEM, and AFM. The results of Al-27 and 29Si MAS NMR indicate that the distribution of silicon and aluminum in the synthesized materials is more uniform and homogeneous than that in the mixed oxides prepared via the traditional sol-gel method even at high alumina contents. The type and density of the acid sites were studied using pyridine adsorption-desorption FTIR spectroscopy. It was shown that the acidity of the synthesized materials is higher than that of the silica-alumina materials prepared by conventional methods.

Method for preparing silicon-aluminum oxide material with mesopore/macropore combined porous structure

Mechanochemical Nonhydrolytic Sol–Gel-Strategy for the Production of Mesoporous Multimetallic Oxides

A Novel Method To Synthesize Amorphous Silica−Alumina Materials with Mesoporous Distribution without Using Templates and Pore-Regulating Agents

Preparation of mesoporous material

Method for preparing multistage-hole ZSM-5 molecular sieve

A method of synthesizing a mesoporous MCM-22 molecular sieve and uses of the molecular sieve

Monodisperse molecular sieve microsphere and preparation method thereof

Preparation of Self-Coating Al2O3 Bonded SiAlON Porous Ceramics Using Aluminum Dross and Silicon Solid Waste under Ambient Air Atmosphere

Method for synthesizing monolithic 4A molecular sieve by dry glue process

Preparation and characterization of titania-alumina mixed oxides with hierarchically macro-/mesoporous structures

Preparation of Porous Composite Materials through Silicon Component Foaming and Special Heat Treatment

Construction and Preparation Mechanism of Hierarchically Porous Sio2 Monoliths

Preparation of Mullite Monoliths with Well-Defined Macropores and Mesostructured Skeletons Via the Sol–gel Process Accompanied by Phase Separation

Preparation method of magnetized silicon dioxide aerogel

Preparation of porous silicon by vacuum sublimation dealloying method

Effect of the alumina and silica source mixing procedure on the microstructural evolution of alumina-mullite composite fibers prepared by sol–gel method

Preparation of Hierarchical Porous Silicon Carbide Monoliths via Ambient Pressure Drying Sol–Gel Process Followed by High-Temperature Pyrolysis

Method for making mesoporous material

The Preparation and Structural Characterization of Ambient-Dried Porous Methylsilicone Matrix Doped with Sio2 Powder

Method for sintering and preparing 7-series foam aluminum alloy material through pore-forming agent method

Preparation method of high-purity low-radioactivity spherical silicon micropowder