Abstract:Metal oxide modification can improve the electrochemical stability of cathodes and the cycle-life and rate capacity of rechargeable lithium ion batteries. Spinel LiNi0.5Mn1.5O4 (LNMO) has been considered as a promising cathode material for its high operating potential and high energy density. In this work, amorphous nano-Al2O3 with different thicknesses were applied to modify the surface of LNMO. Results of structure and surface analysis showed that the nano-Al2O3 film uniformly distributed on the surface of LNMO material without changing the crystal structure of the material. The electrochemical performances revealed that the capacity decay of bare LNMO materials focused on the first 50 cycles under room and elevated temperatures. It is essential to enhance the electrochemical performances of first 50 cycles. The capacity retention of the first 50 cycles was enhanced by the man made Al2O3 interface between active LNMO and electrolyte. The as-prepared surface modified LNMO material with the amount of Al2O3 at 1.77% exhibited superior rate and cycling performances under the room temperature even at elevated temperature. It also showed that the interfacial effect mechanism on the enhancement of LNMO performances is significantly important during the initial charging process (0%-20% SOC). In contrast to the impedance increasing with the SOC in the bare LNMO batteries, the resistance decreased dramatically in the first 20% SOC and almost kept constant during the following charging process. Both of the interface resistance between the cathode and electrolyte and charge transfer impedance were reduced, and the diffusion rate of lithium ion were improved. (C) The Author(s) 2018. Published by ECS.

Enhancing Interfacial Kinetics and Stability of LiMn2O4 Cathode by Fabricating an Artificial Cathode Electrolyte Interphase of LiNbO3

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Liquid-Phase Integrated Surface Modification to Construct Stable Interfaces and Superior Performance of High-Voltage LiNi0.5Mn1.5O4 Cathode Materials

Reconstructing Inorganic‐Rich Interphases by Nonflammable Electrolytes for High‐Voltage and Low‐Temperature LiNi0.5Mn1.5O4 Cathodes

Harmonious Dual-Riveting Interface Induced from Niobium Oxides Coating Toward Superior Stability of Li-Rich Mn-Based Cathode

Enhancement of LiNi0.5Mn1.5O4 Cathode Materials Through Interfacial Modification of Amorphous Al2O3 in Lithium Ion Batteries

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

Atomically Interlocked Chemistry Activated by Interstitial Sites in LiMn2O4 Cathode

Constructing fast-ion-diffusion cathode-electrolyte-interphase to improve LiNi0.8Co0.1Mn0.1O2 cathode cyclic stability with composite polymer conductors

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Stabilizing the Lithium-Rich Manganese-Based Oxide Cathode Via Regulating a CEI Film

Surface Reconstruction of High-Voltage LiNi0.5Mn1.5O4 Cathode via the Sculpture Method toward Enhanced Stability

Multifunctional Self-Reconstructive Cathode/Electrolyte Interphase Layer for Cobalt-Free Li-rich Layered Oxide Cathode

Improving Electrochemical Performance of Spinel-Type Ni/Mn-Based High-Voltage Cathode Material for Lithium-Ion Batteries Via La-F Co-Doping Combined with In-Situ Integrated Perovskite Lamno3 Coating Layer

Addressing Mn Dissolution in High‐Voltage LiNi0.5Mn1.5O4 Cathodes via Interface Phase Modulation

Constructing an Organic Artificial Cathode Electrolyte Interphase of Multi-Functions on Single-Crystal LiNi0.8Co0.1Mn0.1O2 Cathode

An Interfacial Mechanism of Chelate-Borate Electrolyte Additives in Ni-Rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

One-step calcination synthesis of interface-coherent crystallized and surface-passivated LiNi0.5Mn1.5O4 for high-voltage lithium-ion battery

Enhancing Electrochemical Performance of LiMnPO4 Cathode Via LiNi1/3Co1/3Mn1/3O2

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Building interface bonding and shield for stable Li-rich Mn-based oxide cathode