Abstract:9310 carburized steel experiences significant wear and spalling problems when operating under high friction and heavy loads, which severely restricts its applications in the aviation industry. Therefore, it holds great significance to further enhance the surface mechanical properties of 9310 carburized steel through suitable surface strengthening technologies. The Electropulsing-Assisted Ultrasonic Surface Rolling Process (EP-USRP) has been successfully applied to carburized 9310 steel, yielding significant improvements in surface quality, hardness, friction and wear properties, and microstructure. Systematic investigations were conducted under varying EP-USRP parameters. Regarding the electric pulse parameters, it is observed that with the increase in output voltage, surface properties such as surface roughness and surface hardness tend to first optimize and then deteriorate. After applying EP-USRP with optimal parameters, the surface roughness of carburized 9310 steel was reduced to Ra 0.154 μm, a mere 5 % of its initial value. The surface hardness experienced a substantial increase, reaching 909.2 HV, representing a notable improvement of 29.9 % compared to the original sample, with a corresponding hardening depth of 1400 μm. Moreover, the wear amount of carburized 9310 steel witnessed a remarkable reduction to 11.8 % of its initial value, accompanied by a decrease in the coefficient of friction to 43.0 %. The enhancement of carburized 9310 steel through EP-USRP is attributed to two key mechanisms: deformation hardening induced by severe plastic deformation and microstructure strengthening resulting from strain-induced martensitic transformation. Among them, the severe plastic deformation mechanism is dominant, Through these mechanisms, the proportion of small-angle boundaries in carburized 9310 steel strengthened by EP-USRP increased. Additionally, the grain size of the surface layer decreased, and the content of retained austenite in the surface layer decreased, collectively contributing to significant improvements in surface properties, as well as friction and wear performance.

Motor Mandrel Surface Strengthening Layer Compound Technology

Mechanism of Laser Carbonitriding Enhancing the Wear Resistance of 45# Steel

Effect of Carbon Content and Elements Mo and V on the Microstructure and Properties of Stainless Steel Powder Surfacing Layer

Enhanced Wear Resistance of the Ultrastrong Ultrasonic Shot-Peened M50 Bearing Steel with Gradient Nanograins

Self-repairing mechanism and surface characterization of compressor vanes lubricated with oil added with magnesium silicate hydroxide nanorods

Effect of Laser Quenching-Shock Peening Strengthening on the Microstructure and Mechanical Properties of Cr12MoV Steel

Research On Surface Strengthening Induced By Ultrasonic Punching To Improve Mechanical Properties And Corrosion Resistance For Shaft Parts

Mineralogical Mechanochemical Agent Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces

Surface strengthening mechanism of the active grinding carburization

Laser Surface Melting Process for Camshaft Made of Ductile Iron

Further enhancement of surface mechanical properties of carburized 9310 steel by electropulsing-assisted ultrasonic surface rolling process

Study and Analysis of Removing the Carbon Deposition on the Inner Surface of a Turbo-Shaft by Chemically Assisted Magnetic Grinding

Technologies and materials for the renovation of erosion-worn parts of automobile equipment

Novel Blasting-Like Lubricating Process for Cold Extrusion

Process for preparing pretreatment layer and coating on magnesium and magnesium alloy surface

Nanoengineering steel's durability: creating gradient nanostructured spheroidal carbides and lath-shaped nano-martensite via ultrasonic shot peening

Effect of Combined Laser Shock Peening and Nitrogen Implantation on the Microstructure and Tribology of M50 Bearing Steel

Excellent Tensile Strengthening and Corrosion Resistance of M50 Bearing Steels by Plasma Torch Surface Nitrogen Atoms Injection

Surface modification of ultrahigh strength 300M steel under supercritical carbon dioxide (scCO2)-assisted grinding process

Enhancing Heavy Load Wear Resistance of AISI 4140 Steel Through the Formation of a Severely Deformed Compound-Free Nitrided Surface Layer

The Use of Cold Spraying and Micro-Arc Oxidation Techniques for the Repairing and Wear Resistance Improvement of Motor Electric Bearing Shields