Abstract:The superiority of modified spent Li1‐xCoO2 LIB cathode materials over their fresh commercial counterparts is demonstrated, for the first time, based on the structural repair, in situ Al doping and LiF coating realized through utilizing residual Al impurities from current collectors, directly transforming spent LIBs from hazardous e‐waste to high‐voltage cathodes for high‐performing LIBs. The recycling of spent lithium‐ion batteries (LIBs) is gaining considerable attention for its potential to address resource scarcity and mitigating environmental pollution. Therefore, the recycling process of spent LIBs should be simple and efficient and minimize the input of raw materials. This work uses residual Al impurities from current collectors combined with high‐temperature Li supplementation to directly repair spent Li1‐xCoO2 cathode into regenerated materials enhanced with Al doping and LiF coating without additional synthesis steps or cost. The regenerated materials demonstrate an enhanced electrochemical performance compared to commercial cathode material. The modified materials exhibit a notable initial discharge capacity of 181 mA h g−1, with a commendable capacity retention of 80.4% after 400 cycles at a 4.5 V cut‐off voltage. The improved electrochemical performance is attributed to the enhanced crystalline and structural stability of the regenerated materials. Furthermore, the superiority of spent materials over commercial materials modification is clarified for the first time through characterizations and theoretical calculations due to their degraded crystalline structure and abundant Li vacancies. This up‐cycling strategy not only contributes to sustainable waste management of spent LIBs but also provides a potential "shortcut" for advancing next‐generation high‐performance batteries.

Towards Beneficial Transformation of Aluminum Impurity for Cathode Material Regeneration from Spent Lithium-Ion Batteries: In-situ Al Doping for High-Performance LiNi0.9Co0.05Mn0.05O2

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Cation doping method for the restoration of spent LiNi1/3Co1/3Mn1/3O2 cathode material properties

Can Aluminum Impurity from Current Collectors Upgrade Spent Li1‐xCoO2 into a High‐Performing Cathode for Lithium‐Ion Batteries?

Regeneration of Al-doped LiNi0.5Co0.2Mn0.3O2 cathode material by simulated hydrometallurgy leachate of spent lithium-ion batteries

Aluminum Impurity from Current Collectors Reactivates Degraded NCM Cathode Materials toward Superior Electrochemical Performance.

Exploring Threshold of Al-impurities Towards High-performance Al-doped Regenerated LiCoO2

Direct Regeneration of NCM Cathode Material with Aluminum Scraps

Regulating Cathode-Electrolyte Interphase by Confining Functional Aluminum Compound within Ni-Rich Cathodes

Regeneration of Al-doped LiNi1/3Co1/3Mn1/3O2 cathode material via a sustainable method from spent Li-ion batteries

Study on the Preparation and Modification of LiNi0.6Co0.2Mn0.2O2 from Spent Lithium Ion Batteries As Lithium and Cobalt Source

Al Impurity Upcycled High-Voltage Cathodes from Spent LiCoO2 Batteries

Regeneration of High-Performance Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material from Mixed Spent Lithium-Ion Batteries Through Selective Ammonia Leaching

High-rate Performance of LiNi0.5Mn1.45Al0.05O4 Cathode Material for Lithium-Ion Batteries

Regeneration of High-Capacity Ni-rich Layered Cathode Material from Spent Lithium-Ion Batteries

Recycling and reutilization of LiNi0.6Co0.2Mn0.2O2 cathode materials from spent lithium-ion battery

Enhanced Cyclability and High-Rate Capability of LiNi0.88Co0.095Mn0.025O2 Cathodes by Homogeneous Al3+ Doping.

Preparation and Performance of Regenerated Al2O3-Coated Cathode Material LiNi0.8Co0.15Al0.05O2 from Spent Power Lithium-Ion Batteries

An In-Depth Understanding of the Effect of Aluminum Doping in High-Nickel Cathodes for Lithium-Ion Batteries

Sustainable Regeneration of High-Performance Li1–xNaxCoO2 from Cathode Materials in Spent Lithium-Ion Batteries

Gradient-Regeneration of Li(Ni0.9Co0.05Mn0.05)O2 from Spent LiCoO2 Lithium-Ion Battery