Abstract:Lithium nickel manganese cobalt oxide in the spent lithium ion batteries (LIBs) contains a lot of lithium, nickel, cobalt and manganese. However, how to effectively recover these valuable metals under the premise of reducing environmental pollution is still a challenge. In this work, a green, efficient, closed-loop direct regeneration technology is proposed to reconstruct LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode materials from spent LIBs. Firstly, the failure mechanism of NCM523 cathode materials in the spent LIBs is analyzed deeply. It is found that the spent NCM523 material has problems such as the dissolution of lithium and transition metals, surface interface failure and structural transformation, resulting in serious deterioration of electrochemical performance. Then NCM523 material was directly regenerated by supplementing metal ions, granulation, ion doping and heat treatment. Meanwhile, PO43- polyanions were doped into the regenerated NCM material in the recovery process, showing excellent electrochemical performance with discharge capacity of 189.8 mAh g-1 at 0.1 C. The recovery process proposed in this study puts forward a new strategy for the recovery various lithium nickel cobalt manganese oxide (e.g., LiNi1/3Co1/3Mn1/3O2, LiNi0.5Co0.2Mn0.3O2, LiNi0.6Co0.2Mn0.2O2 and LiNi0.8Co0.1Mn0.1O2) and accelerates the industrialization of spent lithium ion battery recycling.

Fluorine migration and in-situ doping for regeneration of Ni-rich LiNi0.9Co0.05Mn0.05O2 cathode material from spent lithium-ion batteries

Urea Solvothermal Regeneration of Spent LiNi0.5Co0.2Mn0.3O2: Performance and Environmental Benefits

Direct regeneration of fluorine-doped carbon-coated LiFePO4 cathode material from spent lithium-ion battery

High performance of regenerated LiFePO4 from spent cathodes via an in situ coating and heteroatom-doping strategy using amino acids

Converting intercalation-type cathode in spent lithium-ion batteries into conversion-type cathode

Recovery of valuable metals and modification of cathode materials from spent lithium-ion batteries

Recycling and reutilization of LiNi0.6Co0.2Mn0.2O2 cathode materials from spent lithium-ion battery

Directly Regenerating of Spent LiCoO2 with Gradient F‐doped Subsurface towards Ultra‐stable Storage Properties

Sustainable and facile synthesis of high-performance nitrogen-doped carbon/graphene@LiFePO4 cathode materials from spent LiFePO4

Recycling and Reutilization of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Materials from Spent Lithium-Ion Battery

Separation and Regeneration of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Materials from Spent Lithium-Ion Batteries: A Facile Process

A green, efficient, closed-loop direct regeneration technology for reconstructing of the LiNi0.5Co0.2Mn0.3O2 cathode material from spent lithium-ion batteries

An analysis of F-doping in Li-rich cathodes

Suppressing Mn Reduction of Li-Rich Mn-Based Cathodes by F-Doping for Advanced Lithium-Ion Batteries

Feasible route for the regeneration of cathode materials from spent lithium-ion batteries via reduction leaching and in-site precipitation

Long‐Life Regenerated LiFePO4 from Spent Cathode by Elevating the d‐Band Center of Fe

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

A closed-loop process for recycling LiNixCoyMn(1âxây)O2 from mixed cathode materials of lithium-ion batteries

Regeneration and Performance of LiFePO4 with Li2CO3 and FePO4 As Raw Materials Recovered from Spent LiFePO4 Batteries

Novel Recycling Approach to Regenerate a LiNi0.6Co0.2Mn0.2O2 Cathode Material from Spent Lithium-Ion Batteries

Leaching kinetics of fluorine during the aluminum removal from spent Li-ion battery cathode materials