Abstract:Supported by the controlling of oxidation‐reduction conditions, the homogeneous LFP‐cathodes can be prepared, displaying uniform particle size and rapid Li‐ions diffusion behaviors. Especially, through Kg‐scale experiments, the pouch full‐cell (LFP‐500 vs recovered graphite) displays ≈4200 mAh capacity, with attractive cycling stability (retention of 96.83%, after 500 loops). Captured by the remarkable environmental/economic value, recycling spent LiFePO4 has attracted numerous attention. However, restricted by diverse failure mechanisms and different particle‐sizes/active‐sites, recycling strategies still suffer from uneven repairing results and poor accessibility. For promoting their application in commercial systems, the uniform physical‐chemical properties are urgent for regenerated samples. Herein, by tailoring oxidation‐reduction manners, the homogeneous cathode materials can be prepared, displaying uniform particle size and restored lattice. The capacity of as‐optimized samples can be kept ≈141.5 mAh g−1 at 1.0 C, and 137 mAh g−1 with a retention of 92% after 300 cycles at 2.0 C. After Kg‐scale experiments, the pouch full‐cell (LFP‐500 vs recovered graphite) delivers ≈4200 mAh capacity, with considerable cycling stability (retention 96.83%, after 500 loops). Importantly, the detailed mechanism of oxidation/reduction‐conditions is investigated, especially their lattice reconstitution and ions‐ diffusion behaviors. Supported by kinetic analysis and DFT calculations, the fascinating stability of LFP‐500 is further proved, mainly derived from the accelerated Li‐diffusion behaviors. Compared to traditional recovering manners, oxidation/reduction process displays low cost, energy‐consumption, and pollution, accompanied with considerable large‐scale application potential. Given this, this work is anticipated to illustrate the in‐depth mechanism of lattice‐reconstruction, while offering significant strategies for large‐scale and homogenized regeneration.

Sustainable and facile synthesis of high-performance nitrogen-doped carbon/graphene@LiFePO4 cathode materials from spent LiFePO4

Direct Regeneration of High-Value LiFePO 4 Cathode Materials with Nitrogen Doped Carbon Coating

High performance of regenerated LiFePO4 from spent cathodes via an in situ coating and heteroatom-doping strategy using amino acids

Environmental-friendly low-cost direct regeneration of cathode material from spent LiFePO 4

Efficient Regeneration of Waste Lifepo4 Cathode Material by Short Process Low Temperature Plasma Assisted Nitrogen Doped Technology

Direct regeneration of waste LiFePO4 cathode materials with a solid-phase method promoted by activated CNTs

Direct regeneration of fluorine-doped carbon-coated LiFePO4 cathode material from spent lithium-ion battery

Closed-loop regeneration of LiFePO4 from spent lithium-ion batteries: A “feed three birds with one scone” strategy toward advanced cathode materials

Upcycling of Spent Carbon Cathode (SCC) into SCC-2600@rGO Facilitates Ultrastable and Fast Lithium Storage

A Multifunctional Amino Acid Enables Direct Recycling of Spent LiFePO4 Cathode Material

Long‐Life Regenerated LiFePO4 from Spent Cathode by Elevating the d‐Band Center of Fe

Regeneration and Performance of LiFePO4 with Li2CO3 and FePO4 As Raw Materials Recovered from Spent LiFePO4 Batteries

Room-temperature Direct Regeneration of Spent LiFePO4 Cathode Using the External Short Circuit Strategy

A green strategy towards fabricating FePO4-graphene oxide for high-performance cathode of lithium/sodium-ion batteries recovered from spent batteries

Large‐Scale and Homogenized Strategies of Spent LiFePO4 Recycling: Reconstruction of Targeted Lattice

A Method of Efficiently Regenerating Waste LiFePO4 Cathode Material after Air Firing Treatment

Simultaneous anodic de-lithiation/cathodic lithium-embedded regeneration method for recycling of spent LiFePO 4 battery

Facile Fabrication of FePO4–V2O5–Graphene Oxide Recovered From Spent LiFePO4 Batteries as High‐Performance Cathode for Lithium/Sodium‐Ion Batteries

Direct Upcycling of Leached FePO4 from Spent Lithium‐Ion Batteries toward Gradient‐Doped LiMnxFe1−xPO4 Cathode Material

Effective Upcycling of Degraded NCM Cathode Materials Assisted by Surface Engineering for High‐Performance Lithium‐Ion Batteries

Direct Recycling Strategy for Spent Lithium Iron Phosphate Powder: an Efficient and Wastewater-Free Process