Abstract:Spherical LiNi1/3Co1/3Mn1/3O2 cathode particles were resynthesized by a carbonate co-precipitation method using spent lithium-ion batteries (LIBs) as a raw material. The physical characteristics of the Ni1/3Co1/3Mn1/3CO3 precursor, the (Ni1/3Co1/3Mn1/3)3O4 intermediate, and the regenerated LiNi1/3Co1/3Mn1/3O2 cathode material were investigated by laser particle-size analysis, scanning electron microscopy–energy-dispersive spectroscopy (SEM-EDS), thermogravimetry–differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), inductively coupled plasma–atomic emission spectroscopy (ICP-AES), and X-ray photoelectron spectroscopy (XPS). The electrochemical performance of the regenerated LiNi1/3Co1/3Mn1/3O2 was studied by continuous charge–discharge cycling and cyclic voltammetry. The results indicate that the regenerated Ni1/3Co1/3Mn1/3CO3 precursor comprises uniform spherical particles with a narrow particle-size distribution. The regenerated LiNi1/3Co1/3Mn1/3O2 comprises spherical particles similar to those of the Ni1/3Co1/3Mn1/3CO3 precursor, but with a narrower particle-size distribution. Moreover, it has a well-ordered layered structure and a low degree of cation mixing. The regenerated LiNi1/3Co1/3Mn1/3O2 shows an initial discharge capacity of 163.5mAhg−1 at 0.1C, between 2.7 and 4.3V; the discharge capacity at 1C is 135.1mAhg−1, and the capacity retention ratio is 94.1% after 50 cycles. Even at the high rate of 5C, LiNi1/3Co1/3Mn1/3O2 delivers the high capacity of 112.6mAhg−1. These results demonstrate that the electrochemical performance of the regenerated LiNi1/3Co1/3Mn1/3O2 is comparable to that of a cathode synthesized from fresh materials by carbonate co-precipitation.

Regeneration of Al-doped LiNi1/3Co1/3Mn1/3O2 cathode material via a sustainable method from spent Li-ion batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Regeneration of Al-doped LiNi0.5Co0.2Mn0.3O2 cathode material by simulated hydrometallurgy leachate of spent lithium-ion batteries

Preparation and Performance of Regenerated Al2O3-Coated Cathode Material LiNi0.8Co0.15Al0.05O2 from Spent Power Lithium-Ion Batteries

Study on the Preparation and Modification of LiNi0.6Co0.2Mn0.2O2 from Spent Lithium Ion Batteries As Lithium and Cobalt Source

Revealing Lithium Configuration in Aged Layered Oxides for Effective Regeneration

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

The regeneration and electrochemical performance study of NCM622 cathode materials

Nondestructive Electrochemical Capacity Restoration of LiNi1/3Co1/3Mn1/3O2 Cathode for Lithium Batteries

Regenerated Ni-Doped LiCoO 2 from Spent Lithium-Ion Batteries as a Stable Cathode at 4.5 V

Separation and Regeneration of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Materials from Spent Lithium-Ion Batteries: A Facile Process

Direct Regeneration of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode from Spent Lithium-Ion Batteries by the Molten Salts Method

Preparation of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent Li-ion batteries

Short-Process Regeneration of Highly Stable Spherical LiCoO2 Cathode Materials from Spent Lithium-Ion Batteries through Carbonate Precipitation

Restoring Surface Defect Crystal of Li-Lacking LiNi 0.6 Co 0.2 Mn 0.2 O 2 Material Particles toward More Efficient Recycling of Lithium-Ion Batteries

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

Synthesis and Electrochemical Performance of Cathode Material Li1.2Co0.13Ni0.13Mn0.54O2 from Spent Lithium-Ion Batteries

Recycling and Reutilization of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Materials from Spent Lithium-Ion Battery

Recycling and reutilization of LiNi0.6Co0.2Mn0.2O2 cathode materials from spent lithium-ion battery

Performance of LiNi1/3Co1/3Mn1/3O2 Prepared from Spent Lithium-Ion Batteries by a Carbonate Co-Precipitation Method

Boosting efficient and low-energy solid phase regeneration for single crystal LiNi0.6Co0.2Mn0.2O2 via highly selective leaching and its industrial application