Abstract:Supported by the controlling of crush‐sinter conditions, the homogeneous hereto LCO‐cathodes can be prepared, concentrated particle sizes, uniform distribution of doped elements, and stable crystal structure can be obtained. Interestingly, through tailoring introduction of Li/Co anti‐sites, the regenerated LiCoO2 delivered a considerable capacity retention of 88.86% after 500 cycles at 5.0 C, bringing about fascinated electrochemical performance and structural stability. Captured by relatively low energy consumption and harmful gas‐emission, direct regeneration has captured numerous attention, but still suffers from different particle sizes and diverse doping hetero‐elements, hardly meeting the market demand. Herein, assisted by the crush‐sinter regeneration from element to grain further to particle, homogenized recovery of hetero spent LiCoO2 is successfully carried out. More interestingly, after tailoring Li/Co anti‐sites ratio, the redox activity of Co‐ions is remarkably enhanced, effectively inhibiting the irreversible escape of O‐atoms under high voltage, bringing about the fascinating electrochemical performance and structural stability. As anticipated, the regenerated LiCoO2 delivered a considerable capacity of 175.2 mAh g−1 at 1.0 C, whilst its capacity retention can remain at 88.86% even after 500 cycles at 5.0 C, better than that of commercial materials. Assembling regenerated materials versus. graphite pouch cell, their considerable practical capacity retention can be kept at ≈91.4% even after 500 cycles. Supported by in situ XRD, electronic structure analysis, and detailed DFT calculations, the excellent high voltage stability of optimized samples mainly comes from the alleviating of phase conversion and oxygen redox. This work is expected to shed light on the potential value of homogenized regenerations, and offer effective strategies of upcycling about spent LCO.

Regenerated Ni-Doped LiCoO 2 from Spent Lithium-Ion Batteries as a Stable Cathode at 4.5 V

In Situ Constructed Spinel Layer Stabilized Upcycled LiCoO2 for High Performance Lithium‐Ion Batteries

Regeneration of Al-doped LiNi1/3Co1/3Mn1/3O2 cathode material via a sustainable method from spent Li-ion batteries

Short-Process Regeneration of Highly Stable Spherical LiCoO2 Cathode Materials from Spent Lithium-Ion Batteries through Carbonate Precipitation

Collaborative Regeneration of Structural Evolution for High-Performance of LiCoO 2 Materials from Spent Lithium-Ion Batteries

Sustainable regenerating of high-voltage performance LiCoO2 from spent lithium-ion batteries by interface engineering

Homogenization and Upcycling of Hetero Spent LiCoO2 Cathodes: Rational Introduction of Li/Co Anti‐Sites Toward Enhanced High‐Voltage Stability

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Sustainable regeneration of high-performance LiCoO2 from completely failed lithium-ion batteries

Microwave-accelerated direct regeneration of LiCoO2 cathodes for Li-ion batteries

Toward High Voltage Performance of LiCoO 2 Cathode Materials Directly Regenerated with a Bulk and Surface Synergistic Approach from Spent Lithium-Ion Batteries

Sustainable Upcycling of Spent LiCoO2 to an Ultra-Stable Battery Cathode at High Voltage

Directly-Regenerated LiCoO 2 with a Superb Cycling Stability at 4.6 V

Separation and Regeneration of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Materials from Spent Lithium-Ion Batteries: A Facile Process

Direct Upcycling of Degraded LiCoO2 Material Toward High‐Performance Single‐Crystal NCM Cathode

Direct conversion of degraded LiCoO<sub>2</sub> cathode materials into high-performance LiCoO<sub>2</sub>: A closed-loop green recycling strategy for spent lithium-ion batteries

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

The auto-oxidative relithiation of spent cathode materials at low temperature environment for efficient and sustainable regeneration

Direct conversion of degraded LiCoO2 cathode materials into high-performance LiCoO2: A closed-loop green recycling strategy for spent lithium-ion batteries

Efficient Direct Regeneration of Spent LiCoO2 Cathode Materials by Oxidative Hydrothermal Solution

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate