Abstract:In‐depth analyses on the electrochemical behaviors and structural and interphasial stabilities of LiNiO2, LiNi0.95Co0.05O2, LiNi0.95Mn0.05O2, and LiNi0.95Al0.05O2 suggest that the intrinsic roles of key dopant elements in high‐nickel cathodes are regulating energy density, degree of delithiation, and extent of H2–H3 phase transition, contrary to the common belief that dopants, especially Mn, can inherently enhance the overall stabilities of high‐nickel cathodes. A rational compositional design is critical for utilizing LiNiO2‐based cathodes with Ni contents > 90% as promising next‐generation cathode materials. Unfortunately, the lack of a fundamental understanding of the intrinsic roles of key elements, such as cobalt, manganese, and aluminum, makes the rational compositional design of high‐Ni cathodes with a limited range of dopants (<10%) particularly challenging. Here, with 5% single‐element doped cathodes, viz., LiNi0.95Co0.05O2, LiNi0.95Mn0.05O2, and LiNi0.95Al0.05O2, along with undoped LiNiO2 (LNO), the influences of the dopants are systematically examined through a control of cutoff charge energy density and a common practice of cutoff charge voltage. Comprehensive investigations into the electrochemical properties, combined with in‐depth analyses of the structural and interfasial stabilities and electrolyte decomposition pathways through advanced characterizations, unveil the following: i) the intrinsic role of dopants regulates the cathode energy density or state‐of‐charge and, more critically, the occurrence of H2–H3 phase transition, which essentially dictates cyclability; ii) undoped LNO can be stabilized well with the avoidance of H2–H3 phase transition; and iii) Co provides more merits overall with an optimized electrochemical operating condition. This work provides guidance for the compositional design of high‐energy‐density high‐Ni cathodes and sheds light on the challenges of removing Co.

An In-Depth Understanding of the Effect of Aluminum Doping in High-Nickel Cathodes for Lithium-Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Influence of Al doping on the structure and electrochemical performance of the Co-free LiNi 0.8 Mn 0.2 O 2 cathode material

Aluminum-doping-based Method for the Improvement of the Cycle Life of Cobalt–nickel Hydroxides for Nickel–zinc Batteries

Effects of Al doping on the electrochemical performances of LiNi0.83Co0.12Mn0.05O2 prepared by coprecipitation

Assessing the Intrinsic Roles of Key Dopant Elements in High‐Nickel Layered Oxide Cathodes in Lithium‐Based Batteries

Tuning Dopant Distribution for Stabilizing the Surface of High‐Nickel Layered Oxide Cathodes for Lithium‐Ion Batteries

Improving Structure and Electrochemical Performance of Single-Crystal Ni-Rich Cathodes by Aluminium Doping

Comparison of structural and electrochemical properties of LiNi0.8Co0.15Al0.05O2 with Li site doping by different cations

Structural and Electrochemical Characteristics of Co and Al Co-Doped Lithium Nickelate Cathode Materials for Lithium-Ion Batteries

Enhancing the Electrochemical Performance of Ni-Rich LiNi0.88Co0.09Al0.03O2 Cathodes through Tungsten-Doping for Lithium-Ion Batteries

(Invited) Delineating the Intricacies Involved in the Synthesis of Cobalt-Free High-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries

Effects of Nb-doping on cycle life, self-discharge and crack resistance of Ni-rich LiNi0.94Co0.02Al0.04O2 cathode for Li-ion batteries

Cobalt-free nickel-rich cathode materials based on Al/Mg co-doping of LiNiO2 for lithium ion battery

Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries

Slug-flow synthesis of NCMA: Effect of substitution of cobalt with aluminum on the electrochemical performance of Ni-rich cathode for lithium-ion battery

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries