Abstract:Although the LiNi0.88Co0.09Al0.03O2 with high Ni content has received intensive attention as an inexpensive cathode material possessing high energy density, it also encounters a poor cycling issue because of the micro-cracks caused by phase transition and serious side reactions between electrodes with electrolyte. In this study, dual-modification of the material is achieved by LiBO2-coating and Mg-doping, aiming to stabilize its crystal structure and reduce its surface activity. Furthermore, a systematic exploration was made into the influence of Mg-doping and LiBO2-coating layers on the particle morphology, crystal structure and electrochemical traits. According to the XRD (X-ray diffraction) outcomes, the Mg-doping and LiBO2-coating both expand the interplanar space and lower the Ni2+/ Li+ cation mixing. According to the TEM (transmission electron microscopy) and XPS (X-ray photoelectron spectroscopy) findings, the LiBO2-coating layer is within 25 nm and the Mg-doping heightens the Ni2+ content. In the meanwhile, the electrochemical measurement indicates that dual-modification with LiBO2-coating and Mg-doping was effective in strengthening the discharge ability, rate capability and cycling behavior of LiNi0.88Co0.09Al0.03O2 due to the elevated rate of Li+ diffusion, the constrained electrode side reaction with electrolyte, as well as the improved reversibility of H2 to H3 phase. Besides, the cylindrical 18650 battery with co-modification cathode show excellent prolonged cycling stability both at room and high temperature.

Effects of Al doping on the electrochemical performances of LiNi0.83Co0.12Mn0.05O2 prepared by coprecipitation

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Influence of Al doping on the structure and electrochemical performance of the Co-free LiNi 0.8 Mn 0.2 O 2 cathode material

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi0.5Mn1.5O4 spinel cathode materials

An In-Depth Understanding of the Effect of Aluminum Doping in High-Nickel Cathodes for Lithium-Ion Batteries

Synergistic effect of Al–B co-doping to boost the LiNi0.9Co0.05Mn0.05O2 properties in lithium-ion batteries

Effect of Trace Al Surface Doping on the Structure, Surface Chemistry and Low Temperature Performance of LiNi0.5Co0.2Mn0.3O2 Cathode

Structural and Electrochemical Characteristics of Co and Al Co-Doped Lithium Nickelate Cathode Materials for Lithium-Ion Batteries

Effects of Nb-doping on cycle life, self-discharge and crack resistance of Ni-rich LiNi0.94Co0.02Al0.04O2 cathode for Li-ion batteries

Effect of Zr–Y Double Doping and Al2O3 Coating on Properties of Nickel-Rich Monomer LiNi0.6Co0.2Mn0.2O2 Cathode Material for Li-Ion Batteries

Slug-flow synthesis of NCMA: Effect of substitution of cobalt with aluminum on the electrochemical performance of Ni-rich cathode for lithium-ion battery

Electrochemical performances of LiNi0.83Co0.12Mn0.05O2 by dual doping of Mg and Ti

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Enhanced lithium storage capability of Ni-rich LiNi0.9CoxMn0.1−xO2(0 ≤ x ≤ 0.1) cathode by co-operation of Al-doping and V-coating

Preparation of LiNi0.8Co0.20-xAlxO2 by Carbonate Co-Precipitation Process

An Mg–Al dual doping strategy to enhance the structural stability and long cycle life of LiNi0.8Co0.1Mn0.1O2 cathode material

Al Substitution for Mn during Co-Precipitation Boosts the Electrochemical Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2

Comparison of structural and electrochemical properties of LiNi0.8Co0.15Al0.05O2 with Li site doping by different cations

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery