Abstract:Improving the energy density and cost of lithium-ion batteries (LIBs) requires a rational compositional design of layered oxide LiNi 1-x-y Mn x Co y O 2 (NMC) cathodes. The prevailing trend is to increase the nickel content in the cathode to maximize energy density, but high-nickel NMC generally suffers from surface and bulk instabilities that shorten battery life. Dopants, such as cobalt, can help mitigate these issues, but its supply shortage issue prohibits its usage especially in the massive electric vehicle market. Our recent finding suggests that a combination of manganese and aluminum in LiNi 0.9 Mn 0.05 Al 0.05 O 2 (NMA-90) promotes attractive energy density, cycle life, rate capability and thermal stability, proving that cobalt can be eliminated in high-nickel cathodes. Post-mortem analysis further reveals that the Mn-Al combination provides synergistic improvements in structural and surface stabilities compared to LiNi 0.9 Mn 0.05 Co 0.05 O 2 (NMC-90) and LiNi 0.9 Co 0.05 Al 0.05 O 2 (NCA-90). A thorough understanding of the relationship between the synthesis condition and optimal materials properties of NMA-90 is necessary to enable its large-scale deployment. We will present findings from the calcination and coprecipitation study of several cobalt-free cathodes to elucidate this relationship. It is revealed that the cycle stability of LiNi 0.9 Mn 0.1 O 2 (NM-90) is not dependent on Li/Ni mixing or primary particle size, but is dependent on the calcination temperature. Incorporating Al into NM-90 during coprecipitation reactions cause high internal porosity in the hydroxide precursor, which impacts the final morphology of the calcined cathodes and thus their electrochemical stability. The ongoing work in our lab provides insight on the synthesis sensitivity of NMA and strategizes methods to control its electrochemical properties.

Al Substitution for Mn during Co-Precipitation Boosts the Electrochemical Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

Modifying Li@Mn 6 Superstructure Units by Al Substitution to Enhance the Long‐Cycle Performance of Co‐Free Li‐Rich Cathode

Modifying Li@Mn6 Superstructure Units by Al Substitution to Enhance the Long‐Cycle Performance of Co‐Free Li‐Rich Cathode

Substantial Doping Engineering in Layered LiNi 0.5+x Co 0.2−x Mn 0.3 O 2 Materials for Lithium-Ion Batteries

An Mg–Al dual doping strategy to enhance the structural stability and long cycle life of LiNi0.8Co0.1Mn0.1O2 cathode material

Suppressed Voltage Decay and Improved Electrochemical Performance by Coating LiAl5O8 on the Surface of Li1.2Mn0.54Ni0.13Co0.13O2

Cobalt/aluminum co-substitution in a LiNi0.9Mn0.1O2 layered cathode for improving kinetics

Modulating the local electronic structure via Al substitution to enhance the electrochemical performance of Li-rich Mn-based cathode materials

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Slug-flow synthesis of NCMA: Effect of substitution of cobalt with aluminum on the electrochemical performance of Ni-rich cathode for lithium-ion battery

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

(Invited) Delineating the Intricacies Involved in the Synthesis of Cobalt-Free High-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries

Effect of Molybdenum Substitution on Electrochemical Performance of Li[Li0.2Mn0.54Co0.13Ni0.13]O-2 Cathode Material

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

Study on electrochemical performance of Al-substitution for different cations in Li-rich Mn-based materials

Influence of Al doping on the structure and electrochemical performance of the Co-free LiNi 0.8 Mn 0.2 O 2 cathode material

Enhanced lithium storage capability of Ni-rich LiNi0.9CoxMn0.1−xO2(0 ≤ x ≤ 0.1) cathode by co-operation of Al-doping and V-coating

Effects of Al doping on the electrochemical performances of LiNi0.83Co0.12Mn0.05O2 prepared by coprecipitation

Improved Electrochemical Performances of Nanocrystalline Li[Li₀.₂Mn₀.₅₄Ni₀.₁₃Co₀.₁₃]O₂ Cathode Material for Li-ion Batteries