Abstract:Although the LiNi0.88Co0.09Al0.03O2 with high Ni content has received intensive attention as an inexpensive cathode material possessing high energy density, it also encounters a poor cycling issue because of the micro-cracks caused by phase transition and serious side reactions between electrodes with electrolyte. In this study, dual-modification of the material is achieved by LiBO2-coating and Mg-doping, aiming to stabilize its crystal structure and reduce its surface activity. Furthermore, a systematic exploration was made into the influence of Mg-doping and LiBO2-coating layers on the particle morphology, crystal structure and electrochemical traits. According to the XRD (X-ray diffraction) outcomes, the Mg-doping and LiBO2-coating both expand the interplanar space and lower the Ni2+/ Li+ cation mixing. According to the TEM (transmission electron microscopy) and XPS (X-ray photoelectron spectroscopy) findings, the LiBO2-coating layer is within 25 nm and the Mg-doping heightens the Ni2+ content. In the meanwhile, the electrochemical measurement indicates that dual-modification with LiBO2-coating and Mg-doping was effective in strengthening the discharge ability, rate capability and cycling behavior of LiNi0.88Co0.09Al0.03O2 due to the elevated rate of Li+ diffusion, the constrained electrode side reaction with electrolyte, as well as the improved reversibility of H2 to H3 phase. Besides, the cylindrical 18650 battery with co-modification cathode show excellent prolonged cycling stability both at room and high temperature.

Structural and Electrochemical Characteristics of Co and Al Co-Doped Lithium Nickelate Cathode Materials for Lithium-Ion Batteries

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Synthesis And Characterization Of Li(Li0.2mn0.4fe0.2m0.2)O-2 (M=Co, Ni, Cr, Al) Cathode Materials For Li-Ion Batteries

Influence of Al doping on the structure and electrochemical performance of the Co-free LiNi 0.8 Mn 0.2 O 2 cathode material

Cobalt-free nickel-rich cathode materials based on Al/Mg co-doping of LiNiO2 for lithium ion battery

Preparation of LiNi0.8Co0.20-xAlxO2 by Carbonate Co-Precipitation Process

Al, B, and F doped LiNi1/3Co1/3Mn1/3O2 as cathode material of lithium-ion batteries

Effects of Al doping on the electrochemical performances of LiNi0.83Co0.12Mn0.05O2 prepared by coprecipitation

An In-Depth Understanding of the Effect of Aluminum Doping in High-Nickel Cathodes for Lithium-Ion Batteries

Co‐doping of Al3+ and Ti4+ and electrochemical properties of LiNiO2 cathode materials for lithium‐ion batteries

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Electrochemical Performances of Layered LiNi0.7CO0.3–xMxO2 (m=al, Mn, Cr; X=0.05) Cathode Materials for Rechargeable Lithium Batteries

Effects of Abundant Co Doping on the Structure and Electrochemical Characteristics of LiMn1.5Ni0.5−xCoxO4

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi0.5Mn1.5O4 spinel cathode materials

Li[Li0.20Ni0.128Co0.136Mn0.536]O2 Cathode Material for Lithium-Ion Batteries

Comparison of structural and electrochemical properties of LiNi0.8Co0.15Al0.05O2 with Li site doping by different cations