Abstract:This study presents a backside loading design inductive tactile sensor with the monolithic integration of thermometer. Based on the commercially available standard complementary metal-oxide-semiconductor (CMOS) process (the TSMC <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$0.35\mu \text{m}$ </tex-math></inline-formula> 2P4M CMOS process) and the in-house post CMOS processes, the sensing chip is designed and implemented. The electrical connection is further achieved by using the flip-chip bonding process, and hence the breakage of bonding wires by the tactile load can be avoided. The CMOS sensing chip consists of the magnetic sensing coil and the polysilicon RTD (resistive thermal detector). Moreover, a cavity is defined on the backside (silicon substrate) of CMOS chip to act as a mold for the polymer filler as well as the housing for the chrome steel ball contact interface. The tactile force will cause the polymer deformation and chrome steel ball displacement, and further lead to the magnetic flux change on the sensing coil. Thus, the tactile force is detected by the inductance variation of magnetic sensing coil on the CMOS chip. Moreover, the temperature variation is detected by the resistance change of RTD thermometer, and the in-situ temperature monitoring during tactile loading is achieved. The force response of the proposed tactile sensor and the temperature response of the thermometer have been characterized. The influence of temperature variation on the tactile sensor has also been calibrated. Moreover, the characteristics of the thermometer on sensing chip at different contact conditions are also investigated.

Monolithically Vertical Integration with Capacitive Proximity and Inductive Force Sensor with Sensing Range Enhancement

MONOLITHIC/VERTICAL INTEGRATION OF PIEZO-RESISTIVE TACTILE SENSOR AND INDUCTIVE PROXIMITY SENSOR USING CMOS-MEMS TECHNOLOGY

Development of a proximity sensor with vertically monolithic integrated inductive and capacitive sensing units

Cmos-Mems Tri-Axial Piezo-Resistive Tactile Sensor With Monolithically/ Vertically Integrated Inductive Proximity Sensor

Vertical Integration of Capacitive and Piezo-Resistive Sensing Units to Enlarge the Sensing Range of CMOS-MEMS Tactile Sensor

Implementation of vertical-integrated dual mode inductive-capacitive proximity sensor

Vertical Integration of Force Transmission Structure on Capacitive Cmos-Mems Tactile Force Sensor for Sensitivity Improvement

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

Ultra-Sensitive Tactile Force/Proximity Sensor Based on Monolithically Integrated Microcantilever

A Dual Spiral-Coils Tactile Sensor with Novel Driving Modes for Inductive Force and Capacitive Proximity Sensing

A dual sensing modes capacitive tactile sensor for proximity and tri-axial forces detection

Vertically Integrated Multiple Electrode Design For Sensitivity Enhancement Of Cmos-Mems Capacitive Tactile Sensor

CMOS Chip for Solid-State Tactile Force Sensor

CMOS-MEMS capacitive tactile sensor with vertically integrated sensing electrode array for sensitivity enhancement

Monolithic Integration of Capacitive Sensors Using A Double-Side Cmos Mems Post Process

FLIP-CHIP IR AND FORCE SENSORS FOR BOTH TOUCH AND TOUCHLESS ELEVATOR BUTTONS APPLICATIONS

Inductive Micro Tri-Axial Tactile Sensor Using a CMOS Chip with a Coil Array

A novel cmos-mems tri-axial tactile force sensor using capacitive and piezoresistive sensing mechanisms

Design and Implementation of Vertically Integrated Deformable Hermetic Chambers for the Sensitivity Enhancement of CMOS-MEMS Capacitive Pressure Sensor

Flexible Centralized Tri-Axis Force Sensor based on Capacitance and Intrinsic Resistance of Bump Structure

Development of the Backside Loading Inductive Tactile Force Sensor Using the Flip-Chip Bonding of CMOS Sensing Chip