Abstract:This study presents a backside loading design inductive tactile sensor with the monolithic integration of thermometer. Based on the commercially available standard complementary metal-oxide-semiconductor (CMOS) process (the TSMC <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$0.35\mu \text{m}$ </tex-math></inline-formula> 2P4M CMOS process) and the in-house post CMOS processes, the sensing chip is designed and implemented. The electrical connection is further achieved by using the flip-chip bonding process, and hence the breakage of bonding wires by the tactile load can be avoided. The CMOS sensing chip consists of the magnetic sensing coil and the polysilicon RTD (resistive thermal detector). Moreover, a cavity is defined on the backside (silicon substrate) of CMOS chip to act as a mold for the polymer filler as well as the housing for the chrome steel ball contact interface. The tactile force will cause the polymer deformation and chrome steel ball displacement, and further lead to the magnetic flux change on the sensing coil. Thus, the tactile force is detected by the inductance variation of magnetic sensing coil on the CMOS chip. Moreover, the temperature variation is detected by the resistance change of RTD thermometer, and the in-situ temperature monitoring during tactile loading is achieved. The force response of the proposed tactile sensor and the temperature response of the thermometer have been characterized. The influence of temperature variation on the tactile sensor has also been calibrated. Moreover, the characteristics of the thermometer on sensing chip at different contact conditions are also investigated.

FLIP-CHIP IR AND FORCE SENSORS FOR BOTH TOUCH AND TOUCHLESS ELEVATOR BUTTONS APPLICATIONS

A User-Friendly Packaging Solution for Silicon-Based Pressure Die to Develop Prosthetic Tactile Sensing

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

Development of the Backside Loading Inductive Tactile Force Sensor Using the Flip-Chip Bonding of CMOS Sensing Chip

Monolithically Vertical Integration with Capacitive Proximity and Inductive Force Sensor with Sensing Range Enhancement

Flip-Chip Integration of Inductive CMOS Tactile Sensor with Si Cavity for Polymer-Filler/Metal-Ball Sensing Interface

CMOS Chip for Solid-State Tactile Force Sensor

MONOLITHIC/VERTICAL INTEGRATION OF PIEZO-RESISTIVE TACTILE SENSOR AND INDUCTIVE PROXIMITY SENSOR USING CMOS-MEMS TECHNOLOGY

Ultra-Sensitive Tactile Force/Proximity Sensor Based on Monolithically Integrated Microcantilever

Development of Wearable Tactile Sensor Based on Galinstan Liquid Metal for Both Temperature and Contact Force Sensing.

Wireless Sensing System-on-Chip for Near-Field Monitoring of Analog and Switch Quantities

Development of a proximity sensor with vertically monolithic integrated inductive and capacitive sensing units

Liquid Metal-Based Wearable Tactile Sensor for Both Temperature and Contact Force Sensing

A Flexible Capacitive Tactile Sensor Array with High Scanning Speed for Distributed Contact Force Measurements

Molding/Encapsulation/Integration Approach for Tactile-Bump And Sensing-Interface of Inductive Tactile Sensor

Development of CMOS MEMS inductive type tactile sensor with the integration of chrome steel ball force interface

Inductive Micro Tri-Axial Tactile Sensor Using a CMOS Chip with a Coil Array

Monolithic integrated optoelectronic chip for vector force detection

Vertical Integration of Capacitive and Piezo-Resistive Sensing Units to Enlarge the Sensing Range of CMOS-MEMS Tactile Sensor

CMOS-Based Tactile Force Sensor: A Review

Low-Cost, Flexible Annular Interdigital Capacitive Sensor (faics) with Carbon Black-Pdms Sensitive Layer for Proximity and Pressure Sensing