Abstract:This study presents the design, fabrication, and testing of a novel capacitive type CMOS-MEMS tactile sensor with vertically integrated sensing structures for enhancing sensitivity, and discretized sensing array design for inhibiting residual stress warpage. The proposed type tactile sensor utilizes polymer buffer above the sensor and polymer fill-in between the vertically integrated sensing structures as force transmission layers. This enables effective force loading onto the sensor, and more importantly, simultaneous deformation of the two vertically integrated sensing structures during force loading, thereby guaranteeing an increase in sensitivity. The enhancement in sensitivity of the proposed tactile sensor was demonstrated to be achieved under the same footprint area. To mitigate warpage issues that may occur due to thin film residual stresses, the sensor was discretized into arrays of separate sensing units. Sensing units are electrically connected in a parallel fashion to ensure maximum capacitance signal. As compared to a reference tactile sensor with conventional sensing electrodes, the proposed design showed a near 1.3-fold enhancement in sensitivity. Measurements also indicate the 5 x 5 array design could tolerate the influence of residual stress. Additionally, effect of operating temperature on initial capacitance (temperature coefficient of offset, TCO) and capacitance change signal during force loadings (temperature coefficient of sensitivity, TCS) were investigated for both the reference and proposed type tactile sensors. (C) 2020 Elsevier B.V. All rights reserved.

Vertical Integration of Capacitive and Piezo-Resistive Sensing Units to Enlarge the Sensing Range of CMOS-MEMS Tactile Sensor

Vertically Integrated Multiple Electrode Design For Sensitivity Enhancement Of Cmos-Mems Capacitive Tactile Sensor

CMOS-MEMS capacitive tactile sensor with vertically integrated sensing electrode array for sensitivity enhancement

MONOLITHIC/VERTICAL INTEGRATION OF PIEZO-RESISTIVE TACTILE SENSOR AND INDUCTIVE PROXIMITY SENSOR USING CMOS-MEMS TECHNOLOGY

Vertical Integration of Force Transmission Structure on Capacitive Cmos-Mems Tactile Force Sensor for Sensitivity Improvement

Novel Two-Stage CMOS-MEMS Capacitive-Type Tactile-Sensor with ER-fluid Fill-in for Sensitivity and Sensing Range Enhancement

A novel cmos-mems tri-axial tactile force sensor using capacitive and piezoresistive sensing mechanisms

Cmos-Mems Tri-Axial Piezo-Resistive Tactile Sensor With Monolithically/ Vertically Integrated Inductive Proximity Sensor

Electric Modulation on the Sensitivity and Sensing Range of CMOS-MEMS Tactile Sensor by Using the PDMS Elastomer Fill-In

Monolithically Vertical Integration with Capacitive Proximity and Inductive Force Sensor with Sensing Range Enhancement

A tunable range/sensitivity CMOS-MEMS capacitive tactile sensor with polymer fill-in technique

Design and Implementation of Vertically Integrated Deformable Hermetic Chambers for the Sensitivity Enhancement of CMOS-MEMS Capacitive Pressure Sensor

An Analytical Model for Studying the Structural Effects and Optimization of A Capacitive Tactile Sensor Array

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

IN-PROCESS AND IN-USE MODULATION OF SENSITIVITY AND SENSING RANGE FOR CMOS-MEMS TACTILE SENSOR WITH DIELECTRIC PDMS NANOCOMPOSITE

A Flexible Capacitive Tactile Sensor Array for Prosthetic Hand Real-Time Contact Force Measurement.

Mechanical Force-Displacement Transduction Structure for Performance Enhancement of CMOS-MEMS Pressure Sensor

Monolithic Integration of Capacitive Sensors Using A Double-Side Cmos Mems Post Process

Dual-Detections of Tactile Force and Proximity with an Ultra-Sensitive Integrated Microcantilever Sensor

A Modified Analytical Model to Study the Sensing Performance of a Flexible Capacitive Tactile Sensor Array

Vertically Integrated Double-Bridge Design for CMOS-MEMS Tri-Axial Piezo-Resistive Force Sensor