Abstract:Current flexible/compliant tactile sensors suffer from low sensitivity and high hysteresis introduced by the essential viscosity characteristic of soft material, either used as compliant sensing element or as flexible coverage. To overcome these disadvantages, this paper focuses on developing a tactile sensor with a smart hybrid structure to obtain comprehensive properties in terms of size, compliance, robustness and pressure sensing ability so as to meet the requirements of limited space applications such as prosthetic fingertips. Employing micro-fabricated tiny silicon-based pressure die as the sensing element, it is easy to have both small size and good mechanical performance. To protect it from potential damage and maintain the compliant surface, a rigid base and a soft layer form a sealed chamber and encapsulate the fixed die together with fluid. The fluid serves as highly efficient pressure propagation media of mechanical stimulus from the compliant skin to the pressure die without any hazard impacting the vulnerable connecting wires. To understand the pressure transmission mechanism, a simplified and concise analytic model of a spring system is proposed. Using easy fabrication technologies, a prototype of a 3 x 3 sensor array with total dimensions of 14mm x 14mm x 6.5mm was developed. Based on the quasi-linear relationship between fluid volume and pressure, finite element modeling was developed to analyze the chamber deformation and pressure output of the sensor cell. Experimental tests of the sensor prototype were implemented. The results showed that the sensor cell had good sensing performance with sensitivity of 19.9 mV N-1, linearity of 0.998, repeatability error of 3.41%, and hysteresis error of 3.34%. The force sensing range was from 5 mN to 1.6 N.

Flip-Chip Integration of Inductive CMOS Tactile Sensor with Si Cavity for Polymer-Filler/Metal-Ball Sensing Interface

Development of the Backside Loading Inductive Tactile Force Sensor Using the Flip-Chip Bonding of CMOS Sensing Chip

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique.

Optical Micro/Nanofiber-Enabled Compact Tactile Sensor for Hardness Discrimination.

Development of CMOS MEMS inductive type tactile sensor with the integration of chrome steel ball force interface

A CMOS-MEMS Electromagnetic-Type Tactile Sensor with Polymer-Filler and Chrome-Steel Ball Sensing Interface

Molding/Encapsulation/Integration Approach for Tactile-Bump And Sensing-Interface of Inductive Tactile Sensor

Inductive Micro Tri-Axial Tactile Sensor Using a CMOS Chip with a Coil Array

A User-Friendly Packaging Solution for Silicon-Based Pressure Die to Develop Prosthetic Tactile Sensing

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

A NOVEL POLYMER FILLED CMOS-MEMS INDUCTIVE-TYPE TACTILE SENSOR WITH WIRELESS SENSING CAPABILITY

CMOS Chip for Solid-State Tactile Force Sensor

A tunable range/sensitivity CMOS-MEMS capacitive tactile sensor with polymer fill-in technique

MONOLITHIC/VERTICAL INTEGRATION OF PIEZO-RESISTIVE TACTILE SENSOR AND INDUCTIVE PROXIMITY SENSOR USING CMOS-MEMS TECHNOLOGY

CMOS-MEMS capacitive tactile sensor with vertically integrated sensing electrode array for sensitivity enhancement

Smart structure with elastomeric contact surface for prosthetic fingertip sensitivity development

IN-PROCESS AND IN-USE MODULATION OF SENSITIVITY AND SENSING RANGE FOR CMOS-MEMS TACTILE SENSOR WITH DIELECTRIC PDMS NANOCOMPOSITE

FLIP-CHIP IR AND FORCE SENSORS FOR BOTH TOUCH AND TOUCHLESS ELEVATOR BUTTONS APPLICATIONS

A Novel Silicon Based Tactile Sensor with Fluid Encapsulated in the Cover Layer for Prosthetic Hand

Electric Modulation on the Sensitivity and Sensing Range of CMOS-MEMS Tactile Sensor by Using the PDMS Elastomer Fill-In

Vertically Integrated Multiple Electrode Design For Sensitivity Enhancement Of Cmos-Mems Capacitive Tactile Sensor