Abstract:This article presents a design method for a hybrid architecture 360 $^{\circ}$ phase shifter (PS) using a cascade of switched-type phase shifter (STPS) and reflection-type phase shifter (RTPS). A phase-shifted structure that switches between slot line and microstrip is proposed for STPS design, and a 3-dB quadrature coupler based on a capacitively loaded coupled line and parallel transmission line structure is proposed for RTPS design. Equivalent models and closed-form equations are presented for both structures. From the theoretical analysis, it can be found that the proposed phase-shifted structure can achieve a wider matching bandwidth and a lower in-band phase error as the phase-shift range (PSR) increases, which is contrary to the conventional STPS. For the quadrature coupler, a design method to reduce the amplitude difference and phase difference is obtained by theoretical analysis. To validate the proposed concept, a 90 $^{\circ}$ STPS, a quadrature coupler, an RTPS with greater than 90 $^{\circ}$ PSR, a 180 $^{\circ}$ PS with modified dc bias, and a continuously tunable 360 $^{\circ}$ PS were designed, fabricated, and measured. From measurement, the operating bandwidth, return loss (RL), in-band phase error, maximum rms phase error, maximum rms amplitude error, and circuit size of the proposed hybrid architecture 360 $^{\circ}$ PS are 1.7–2.28 GHz (29.1%), 10.5 dB, $\pm$ 4.46 $^{\circ}$ , 2.67 $^{\circ}$ , 0.24 dB, and 0.099 $\uplambda _{\text{g}}^{2}$ , respectively. The average insertion loss at the center frequency is 1.9 dB. The measured results demonstrate the validity of the proposed design method for continuously tunable 360 $^{\circ}$ PS with compact circuit size and low in-band phase error.

Ka-Band Reflective-Type Phase Shifter Using Multi-Resonant Loads and Digital Assistive Techniques

An Ultra Broadband Passive Vector Modulator Phase Shifter

Systematic Design of a Broadband Reflective-Type Phase Shifter with Minimal Loss Variation and High Phase Accuracy

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

A Continuous K-Band Phase Shifter Based on Injection-Locked Dual Voltage-Controlled Oscillators

Hybrid broadband high-precision phase shifter integrated circuit

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

A Frequency Reconfigurable Reflection-Type Phase Shifter for Multi-Band 5G Communication

A Hybrid Architecture 360$^{\circ}$ Phase Shifter With Continuously Tunable Phase Shift and Low In-Band Phase Error

A 27–31 ghz 6-Bit Phase Shifter with Low Phase Error/gain Variation in 65 nm CMOS

A 28ghz Rf Phase Shifter With High Phase Resolution In 180-Nm Cmos Technology

A 22.5–33.5-Ghz Hybrid Phase Shifter with Low Phase and Amplitude Error for 5G and Satellite Communication

Ka-Band Metal-Insulator-Graphene Diode-based Thin-Film Cascaded Reflective-Type Phase Shifter

Reflection Phase Shifter Topology With 180° Tuning Range Using Impedance Transforming Coupler and Series Resonant Load for K-Band Phased Arrays

A Ka-band 0/Π MEMS Phase Shifter

Compact 26–30 GHz Reflection-Type Phase Shifter With 8-Bit Switched Phase Tuning Utilizing Chalcogenide Phase-Change Switches

A Ka-band 3-bit RF MEMS switched line phase shifter implemented in coplanar waveguide

A 44-52 GHz Reflection-type Phase Shifter with 1.4° Phase Resolution in 28nm CMOS Process

A Ka-band 0/∏ MEMS phase shifter

A DMTL Phase Shifter Using Insulation Layer and Saw-Shaped CPW