Abstract:As is well known, a solid oxide fuel cell(SOFC) is a device that can convert chemical energy directly into electrical energy. The possibility to grow thin films of oxide materials is of great importance in the development of SOFC. Recently, it is expected that oxide heterostructures, with almost ideal interfaces, should lead to the interesting artificial materials with some novel properties. So we have prepared superlattice electrolyte thin films.On the MgO single-crystal substrates, multilayer epitaxial thin-film heterostructures of 20 mol% samarium-oxide-doped ceria (Ce0.8Sm0.2O2-, SDC) and 8 mol% yttria-stabilized zirconia (Y2O3: ZrO2YSZ) have been deposited in turn, using the pulsed laser deposition (PLD) technique. Five different superlattices (SDC/YSZ)N (N=3, 5, 10, 20, 30) films are fabricated, keeping the total thickness constant (300 nm), but with a different number of hetero-interfaces. The choice of coupling SDC and YSZ aims to have both layers in the superlattices made of oxygen-ion conductors with compatible crystallographic features. On one hand, we have to remove any potential contribution of the deposition substrate to the total conductivity, and the superlattices may be grown on 110-oriented MgO single-crystalline wafers. On the other hand, the YSZ electrolyte film requires that the temperature should be higher, and SDC as the electrolyte leakage; both should be combined with each other, so as to have complementary advantages. In this way, not only the temperature of SOFCs is reduced, but also the leakage avoided. Because YSZ and SDC both belong to cubic fluorite structure and have similar lattice parameters, the lattice constant of YSZ is 5.14 , and the lattice constant of SDC is 5.44 . Compatible crystal properties, oxygen ion conductivity, and great matching defects can lead to a semi-coherent interface between the ZrO2 and CeO2 layers. The interface effect is obvious. X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM) and AC impedance mearurements are used to characterize the surface morphology, phase structure and electrical properties of the electrolyte film. Results show that the superlattice (SDC/YSZ)N electrolyte films will form obviously interface and better superlattice structure. This kind of thin films do not show crack, with no element diffusion at the interfaces, growing uniformly, densely and smoothly. Electrochemical measurements show a sizable increase in conductivity with increasing number of SDC/YSZ interfaces. So it is an ideal low-temperature fuel cell electrolyte materials.

Plasma-sprayed Bulk-Like Yttria-Stabilized Zirconia Coatings for Solid Oxide Fuel Cell Electrolytes Based on Liquid-Phase Sintering-Induced Interfacial Healing

Effect of densification processes on the properties of plasma-sprayed YSZ electrolyte coatings for solid oxide fuel cells

Plasma-sprayed Y2O3-stabilized ZrO2 electrolyte with improved interlamellar bonding for direct application to solid oxide fuel cells

Influence of Through-Lamella Grain Growth on Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia As an Electrolyte in Solid Oxide Fuel Cells

Performance of YSZ Electrolyte Layer Deposited by Atmospheric Plasma Spraying for Cermet-Supported Tubular SOFC

Modification of Microstructure and Electrical Conductivity of Plasma-Sprayed Ysz Deposit Through Post-Densification Process

Preparation of YSZ electrolyte coatings for SOFC by electron beam physical vapor deposition combined with a sol infiltration treatment

Plasma-Sprayed La0.2Sr0.8MnO3-La0.3Sr0.7TiO3 Bilayer Coatings Along with the Interface Healing Processing Applied as the High Dense Interconnector for Tubular Solid Oxide Fuel Cells

Preparation of yttria-stabilized zirconia electrolyte via atmospheric plasma spraying for metal-supported solid oxide fuel cells

Study on the Properties of Ysz Electrolyte Made by Plaster Casting Method and the Applications in Solid Oxide Fuel Cells

Characterization of YSZ Solid Oxide Fuel Cells Electrolyte Deposited by Atmospheric Plasma Spraying and Low Pressure Plasma Spraying

Production of Dense Yttria-Stabilized Zirconia Thin Films by Dip-Coating for IT-SOFC Application

Sintering Composite Electrolytes of Yttria-Doped Bismuth Oxide and Yttria-Stabilized Zirconia for Solid Oxide Fuel Cells

Solid oxide fuel cell with a spin-coated yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolyte

Influence of Characteristics of Stabilized Zirconia Electrolyte on Performance of Cermet Supported Tubular SOFCs

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Surface modification of yttria-stabilized zirconia electrolyte by atomic layer deposition

Development of ScSZ Electrolyte by Very Low Pressure Plasma Spraying for High-Performance Metal-Supported SOFCs

Fabrication of condense and thin YSZ electrolyte layer using novel thermal-assisted slurry spin coating method for IT-SOFC

Preparation and Characterization of the Superlattice (Sm-Doped Ceria/Yttria-Stabilized Zirconia)N Electrolyte Film