Abstract:Accurate prediction of fatigue performance and life is a key issue in the design and applications of the high strength-to-weight ratio of many contemporary magnesium alloys, which are suitable for ultimate weight reduction purposes in automotive and aircraft components. For example, the ever increasing demands for higher efficiency and light weight typical cases of power generation, aerospace and automotive industries call the maximum exploitation of the material’s properties. The combination of low density (about 1.74 g/ cm3), high specific strength and excellent castability qualifies magnesium alloys as ideal materials for the lightweight constructions [1]. Thus, purely empirical models that heavily rely on larger safety factors are of limited uses. It is now widely recognized that fatigue damage models that are closely related to the microstructural features to provide a more reliable basis for a life prediction, provided that the relevant microstructural damage mechanisms are accurately accounted for. Therefore, there are increasing interests in the fatigue tests combined with the high-resolution microscopic techniques, environmental influencing factors, and especially in understanding their fatigue crack initiation and propagation behaviors with process rationalization [2-4]. Subsequently experimental observations on cast magnesium alloys have accumulatively revealed that the dendrite cell size, pores, secondary phase particles, persistent slip bands and twinning in the dendrite cells considerably affect on the fatigue durability and fatigue cracking behavior or crack growth mechanism of dendritic magnesium alloys [5-8]. The quantitative estimation of small fatigue crack growth rate of cast magnesium alloys is whether simply and effectively to assist the reversed design of cast magnesium alloys or ceaselessly to improve the strength and toughness of cast magnesium alloys. At the same time, it is necessary how to understand that these microstructural features of cast magnesium alloys play role in the fatigue cracking behavior or that the microstructural evolution reacts to the applied loadings. However, it is difficult to use conventional alloying techniques to improve some of their properties, e.g. elastic modulus, elastic-plastic deforming property and the different thermal expansion between phases during the shrinking at the high elevated temperatures. Under these conditions the elastic, and the possible plastic, properties of the secondary phase will influence the mechanical response during an applied loading since the interface of secondary phase will transmit stresses from the matrix around the secondary phase when the interface both the matrix and secondary phase has a compatible strain field. If the elastic

Temperature-dependent Damage of Magnesium Alloy with Ratchetting–fatigue Interaction Effects: Experiments and Mesomechanical Theory

Experimental study on temperature-dependent ratchetting-fatigue interaction of extruded AZ31 magnesium alloy

A mesoscopic damage model for the low-cycle fatigue of an extruded magnesium alloy

In-situ synchrotron X-ray tomography investigation of damage mechanism of an extruded magnesium alloy in uniaxial low-cycle fatigue with ratchetting

Uniaxial ratcheting and fatigue failure behaviors of hot-rolled AZ31B magnesium alloy under asymmetrical cyclic stress-controlled loadings

Fatigue Damage Development in Extruded Mg-3al-Zn Magnesium Alloy

Constitutive Modelling of Ratcheting Behaviour for Nickel-Based Single Crystal Superalloy under Thermomechanical Fatigue Loading Considering Microstructure Evolution

A Study of Fatigue Damage Development in Extruded Mg–Gd–Y Magnesium Alloy

A Study on the critical damage factor of AZ80 magnesium alloy under different temperatures and strain rates

Fatigue crack initiation of magnesium alloys under elastic stress amplitudes: A review

Development of the Fatigue of Magnesium Alloys

Fatigue Cracking Behaviors and Influence Factors of Cast Magnesium Alloys

The Micro-Mechanism of Fatigue Crack Propagation for a Forged Mg–Zn–Y–Zr Alloy in the Gigacycle Fatigue Regime

Effect of Microstructure on Small Fatigue Crack Initiation and Early Propagation Behavior in Mg-10Gd-3Y-0.3Zr Alloy

High-Cycle Fatigue Properties and Life Prediction of ZK30 Magnesium Alloy at Room and Elevated Temperatures

Modeling of Anisotropic and Asymmetric Behaviour of Magnesium Alloys at Elevated Temperature Coupled with Ductile Damage

Cyclic Plasticity Constitutive Model for Uniaxial Ratcheting Behavior of AZ31B Magnesium Alloy

Effect of Microstructure Inhomogeneity and Crack Initiation Environment on the Very High Cycle Fatigue Behavior of a Magnesium Alloy

Research Progress on Hot Tearing Behavior of Mg-Zn Series Alloys

Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms

Molecular dynamics simulation on plastic deformation and failure mechanisms around a crack tip for magnesium alloys