Abstract:This paper presents a finite-element (FE) investigation on the bearing capacity of stainless steel hybrid tubular K-joints with square braces and circular chord. The nonlinear finite-element (FE) models were developed and validated against the test results available in the literature, which were then used to conduct a parametric study including 162 models. The parametric study results showed that the joint strengths of the stainless steel hybrid tubular gapped K-joints increased when the β and τ values increased and when the 2γ and e values decreased. On the other hand, the joint strengths of overlapped K-joints increased when the β, τ, and Ov values increased and when the 2γ values decreased. Furthermore, the bearing capacities obtained from the parametric study were compared with the design strengths calculated from the current design guidelines. The comparison showed that the current design rules of Chinese Code (GB 50017–2017) were generally un-conservative for stainless steel hybrid tubular K-joints. The coefficient of variations (COVs) obtained from the comparison of EC3 (2005), AS/NZS (2001) and GB 50017 (2017) were very large. However, the design strengths calculated from the International Committee for the Development and Study of Tubular Structures (CIDECT) were relatively close to the FE strengths. Therefore, modified design rules are proposed in this paper. New design formulas were developed by applying correction factors (ψg and ψo) to the current design rules of CIDECT (2008) for carbon steel CHS tubular K-joints, considering the effects of key geometric parameters of β, τ, 2γ and Ov, respectively. The proposed design rules can accurately predict the bearing capacity of stainless steel hybrid tubular K-joints with square braces and circular chord, being only 1% conservative to the FE strengths.

Behaviour of In-Service CHS Gap K-joints Strengthened with External Stiffeners

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Experimental study of the static behavior of tubular N-joints

Axial Capacity of CHS T-Joints Reinforced with Welded External Stiffeners Under Load

On compressive behavior of large welded hollow spherical joints with both internal and external stiffeners

Ultimate Bearing Capacity of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates Subjected to Brace Compression

Effects of Chord Pre-Load on Strength of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates

Mechanical Behaviour and Design of Concrete-Filled K and KK CHS Connections

Design of concrete filled tubular CHS T-joints under in-plane bending

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Experiment and Finite Element Analysis on the Ultimate Strength of Ring-Stiffened Tube-Gusset Joints

Behaviour of Chs Brace-To-H-Shaped Chord X-Joints under In-Plane Bending

Experimental Study on the Axial Compressive Strength of Vertical Inner Plate Reinforced Square Hollow Section T-joints

Effect of welding residual stress on the performance of CFST tubular joints

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

Mechanical Behaviour of Concrete-Filled CHS Connections Subjected to In-Plane Bending

Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Tests of SHS Brace-H-shaped Chord X-joints under In-Plane Bending

Analytical Behaviour of CFDST Chord to CHS Brace Composite K-joints

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints