Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Axial Capacity of CHS T-Joints Reinforced with Welded External Stiffeners Under Load

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Experimental study of the static behavior of tubular N-joints

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Design of concrete filled tubular CHS T-joints under in-plane bending

Axial Tensile Behavior and Strength of Welds for CHS Branches to SHS Chord Joints

Experimental Study on the Axial Compressive Strength of Vertical Inner Plate Reinforced Square Hollow Section T-joints

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

Experimental and numerical study on static behaviour of uniplanar CFDST-CHS T-joints

Ultimate Bearing Capacity of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates Subjected to Brace Compression

Behaviour of In-Service CHS Gap K-joints Strengthened with External Stiffeners

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Effects of Chord Pre-Load on Strength of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates

Behavior of circular hollow section joints with multiple brace members and internal stiffeners

Scf Distribution Of Concrete-Filled Chs T- And Y- Joints Under Axial Tension

Experimental Investigation On Circular Cfdst Chord To Chs Brace T-Joints

Tests of CHS T-joints with Convex Chord under Axial Compression

Experimental Study on Hot Spot Stress of Welded Concrete Filled CHS T-joints

Experimental investigation on stress concentration factors of CHS-to-CFCHS T-joints subjected to in-plane bending

Behaviour of Chs Brace-To-H-Shaped Chord X-Joints under In-Plane Bending

Experiment and mechanism analysis of weld fracture of orthogonal CHS-CHS X-joint