Abstract:This study analyzes optical confinement factor and light emitting mode order for three different GaN LEDs: a conventional LED, thin Film LED, and thin Film LED with a photonic crystal (PhC) grating. For the first structure, we increase the thickness of AlxGa1-xN from 0 to 600nm, alter the x composition in AlxGa1-xN from 0.05 to 0.2 in steps of 0.05, and adjust the p-GaN and n-GaN thicknesses each from 0 to 200nm. For the second structure, we alter the n-GaN substrate thickness from 300-1000nm in steps of 100nm and 1000-4000nm in steps of 1000nm. These simulations show that increasing the substrate thickness causes the light emitting mode order to increase. The higher the mode, the more current is needed to make the device emit light. Higher current leads to shorter device lifetime. The last structure contains a photonic crystal grating with a period T = 100nm, 230nm, 460nm, 690nm, 920nm, 1500nm, 2000nm, 3000nm and 50% duty cycle. For each grating period, we display the effects on optical confinement factor and optical field intensity. The results show that changing the grating period does not affect the mode order, but does affect the optical field intensity. A larger grating period corresponds to lower optical field intensity. Maximizing optical field intensity increases the brightness of the device. The simulation method above can be used to improve the efficiency, brightness, and lifetime of GaN LEDs by reducing the effects of transverse mode coupling and maximizing the optical field intensity.

Comparison of GaN LED Optical Simulation in 2D and 3D Space Based on K-Domain Analysis Method

Simulation of Three-fold Symmetric Photonic Crystal Structures on Top of GaN LEDs

High-output power GaN-LED based on surface plasmon enhancement

Simulation of Nanoscale ITO Top Grating of GaN LED

Optical Mode Pattern Study of GaN LEDs with and Without Top Nano-Gratings

Simulation and experiment on 2PC transmitted diffraction grating for GaN LEDs

Role of surface microstructure and shape on light extraction efficiency enhancement of GaN micro-LEDs: A numerical simulation study

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Ray‐tracing Study of Bragg Diffraction‐assisted Light Extraction Efficiency of GaN‐based Light‐emitting Diodes with Vertical Sidewalls

Ray-tracing study of Bragg applications and materials science diffraction-assisted light extraction efficiency of GaN-based light-emitting diodes with vertical sidewalls

The Effects of Nanocavity and Photonic Crystal in InGaN/GaN Nanorod LED Arrays

Light Extraction Improvement of Gan Leds Using Nano-Scale Top Transmission Gratings

Transmission Efficiency Study of Grating Layer Location of a GaN Nano-Grated Structure

Enhancing GaN LED Efficiency through Nano-Gratings and Standing Wave Analysis

Parameters optimization of nanopatterned sapphire substrates for enhancing light extraction efficiency of GaN-based LEDs

Light Extraction Improvement of Gan-Based Light Emitting Diodes Using Patterned Undoped Gan Bottom Reflection Gratings

Simulation of GaN-Based Light Emitting Diodes Incorporating Composition Fluctuation Effects

Study of GaN LED ITO Nano-Gratings With Standing Wave Analysis

Surface Light Extraction Mapping from Two-Dimensional Array of 12-Fold Photonic Quasicrystal on Current Injected Gan-Based Leds

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Two-Dimensional Photonic Quasicrystal on the Surface of Gan-Based Light Emitting Diodes