Abstract:Lab-on-a-chip (LoC) technologies continue to promise lower cost and more accessible platforms for performing biomedical testing in low-cost and disposable form factors. Lab-on-CMOS or lab-on-microchip methods extend this paradigm by merging passive LoC systems with active complementary metal-oxide semiconductor (CMOS) integrated circuits (IC) to enable front-end signal conditioning and digitization immediately next to sensors in fluid channels. However, integrating ICs with microfluidics remains a challenge due to size mismatch and geometric constraints, such as non-planar wirebonds or flip-chip approaches in conflict with planar microfluidics. In this work, we present a hybrid packaging solution for IC-enabled microfluidic sensor systems. Our approach uses a combination of wafer-level molding and direct-write 3D printed interconnects, which are compatible with post-fabrication of planar dielectric and microfluidic layers. In addition, high-resolution direct-write printing can be used to rapidly fabricate electrical interconnects at a scale compatible with IC packaging without the need for fixed tooling. Two demonstration sensor-in-package systems with integrated microfluidics are shown, including measurement of electrical impedance and optical scattering to detect and size particles flowing through microfluidic channels over or adjacent to CMOS sensor and read-out ICs. The approach enables fabrication of impedance measurement electrodes less than 1 mm from the readout IC, directly on package surface. As shown, direct fluid contact with the IC surface is prevented by passivation, but long-term this approach can also enable fluid access to IC-integrated electrodes or other top-level IC features, making it broadly enabling for lab-on-CMOS applications.

A Fast and Plug-and-play Mechanical Connector for Microfluidic Chips

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

A rapid, reliable, and automatable lab-on-a-chip interface

Universal and Versatile Magnetic Connectors for Microfluidic Devices

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

A microfluidic interfacing connection system ($$\upmu $$FICS) combining simplicity, minimalism, robustness, high-pressure, reusability and low cost

Design and fabrication of a microfluidic detection chip

Non-swelling hydrogel-based microfluidic chips.

Bonding-Free Capillary Microfluidics via a 3D-Printed Railed Microchannel

Development and Characterization of a PCB-Based Microfluidic Y-Channel

Microfluidic Lab-on-CMOS Packaging Using Wafer-Level Molding and 3D-Printed Interconnects

USB-driven microfluidic chips on printed circuit boards.

Designing Splicing Digital Microfluidics Chips Based on Polytetrafluoroethylene Membrane

3D Printed Lego®-like Modular Microfluidic Devices Based on Capillary Driving.

A simple method for the evaluation of microfluidic architecture using flow quantitation via a multiplexed fluidic resistance measurement

Squeeze-chip: a Finger-Controlled Microfluidic Flow Network Device and Its Application to Biochemical Assays

Flexibly Driving Micro Flow in A Lab-On-Chip System Via Dry Porous Structure

Plug-n-play microfluidic systems from flexible assembly of glass-based flow-control modules.

Micromachined rubber O-ring micro-fluidic couplers

A Rapid Bonding Method for Fabricating Mixing Microfluidic Chip Based on Micromachining Technology