Abstract:Stereolithography based 3D printing of microfluidics for prototyping has gained a lot of attention due to several advantages such as fast production, cost-effectiveness, and versatility over traditional photolithography-based microfabrication techniques. However, existing consumer focused SLA 3D printers struggle to fabricate functional microfluidic devices due to several challenges associated with micron-scale 3D printing. Here, we explore the origins and mechanism of the associated failure modes followed by presenting guidelines to overcome these challenges. The prescribed method works completely with existing consumer class inexpensive SLA printers without any modifications to reliably print PDMS cast microfluidic channels with channel sizes as low as ~75 μm and embedded channels with channel sizes as low ~200 μm. We developed a custom multi-resin formulation by incorporating Polyethylene glycol diacrylate (PEGDA) and Ethylene glycol polyether acrylate (EGPEA) as the monomer units to achieve micron sized printed features with tunable mechanical and optical properties. By incorporating multiple resins with different mechanical properties, we were able to achieve spatial control over the stiffness of the cured resin enabling us to incorporate both flexible and rigid components within a single 3D printed microfluidic chip. We demonstrate the utility of this technique by 3D printing an integrated pressure-actuated pneumatic valve (with flexible cured resin) in an otherwise rigid and clear microfluidic device that can be fabricated in a one-step process from a single CAD file. We also demonstrate the utility of this technique by integrating a fully functional finger-actuated microfluidic pump. The versatility and accessibility of the demonstrated fabrication method have the potential to reduce our reliance on expensive and time-consuming photolithographic techniques for microfluidic chip fabrication and thus drastically lowering our barrier to entry in microfluidics research.

Bonding-Free Capillary Microfluidics via a 3D-Printed Railed Microchannel

Expanding the capillarics toolbox: 3D-printed microfluidic phaseguides and self-coalescence modules

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

3D Printing Solutions for Microfluidic Chip-To-World Connections

3D Printed Lego®-like Modular Microfluidic Devices Based on Capillary Driving.

Nanofiber Self-Consistent Additive Manufacturing Process for 3D Microfluidics

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components

Rapid prototyping of thermoplastic microfluidic devices via SLA 3D printing

Soft tubular microfluidics for 2D and 3D applications

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components

Facile Fabrication of Microchannel with Unconventional Cross-Section Using 3D Printed Sacrificial Mould

Rapid Prototyping of Thermoplastic Microfluidic 3D Cell Culture Devices by Creating Regional Hydrophilicity Discrepancy

A Low-Cost 3-in-1 3D Printer as a Tool for the Fabrication of Flow-Through Channels of Microfluidic Systems

A Rapid Prototyping Approach for Multi-Material, Reversibly Sealed Microfluidics

Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell-Laden Device

Low-cost rapid prototyping for microfluidics using Parafilm®-based microchannels for low resource settings

Fabrication and Demonstration of a 3D-printing/PDMS Integrated Microfluidic Device

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Hybrid Electrospinning Printing for Nanofiber Self-Supporting 3D Microfluidic Devices