Abstract:In vitro compartmentalisation is an emerging technology for protein evolution and selection. In this presentation, we will report the development of a microdrop-based microfluidic plat- form for in vitro enzyme evolution and selection applications. A microfluidic chip has been developed and fabricated using the standard photolithography method in conjunction with electro- plating and hot embossing techniques. A cross channel geome- try was used to focus liquid flows for droplet generation. To realize on-chip compartmentalised bio-reactions, two droplet generators were fabricated on the same chip. Experiments have been carried out to measure droplet size, generation rate and speed using a photographic technique. Droplet size was found to be decreasing with increasing focusing oil flow rate for a given aqueous phase flow rate. When two droplet generators are used in the same chip, the droplets may be generated asyn- chronously due to different flow conditions. If the droplets were significantly smaller than channel size, the faster moving droplets could pass the slower moving droplets with little co- alescence. If the droplets were of the channel size, the faster moving droplets would break or fuse with the slow droplets. To achieve high rate of droplet fusion, active control should be in place for synchronous generation and fusion. The Synthetic Enzymes initiative in CSIRO is a multi- institutional effort aiming to develop enzymes with dramatically shifted functions or mechanisms that are capable of catalysing novel reactions not known in nature. This will be achieved by developing technology to introduce novel chemical groups to enzymes to synthesise enzymes using highly controllable cell- free methods, and to evolve enzymes using IVC technology. This paper will report some of the results in the IVC chip de- velopment. In particular, we will present some of the data on behaviour of droplets transport in microchannels. Chip design and fabrication

USB-driven microfluidic chips on printed circuit boards.

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

A Low-Cost, Disposable and Portable Inkjet-Printed Biochip for the Developing World

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

A Microfluidic Chip Capable of Switching W/O Droplets to Vertical Laminar Flow for Electrochemical Detection of Droplet Contents.

A robust and scalable active-matrix driven digital microfluidic platform based on printed-circuit board technology

Design of Droplet Manipulation Platform Based on Digital Microfluidic Chip

From functional structure to packaging: full-printing fabrication of a microfluidic chip.

Non-swelling hydrogel-based microfluidic chips.

Studies On Digital Microfluidic Chip For Micro-Total-Analysis Systems

A Robust And Scalable Active-Matrix Driven Digital Microfluidic Platform Based On Printed-Circuit Board Technology Dagger

Two-Dimensional Manipulation of Droplets on a Single-Sided Continuous Optoelectrowetting Digital Microfluidic Chip

A Self-Regulated Microfluidic Device with Thermal Bubble Micropumps

Droplets Transport in a Microfluidic Chip for In Vitro Compartmentalisation

Moving-part-free Microfluidic Systems for Lab-on-a-chip

Microfabrication of A Digital Microfluidic Platform Integrated with an On-Chip Electrochemical Cell

Preparation of microfluidic chips by electroplating and used for microdroplet study

Integrated Optofluidic-Microfluidic Twin Channels: Toward Diverse Application of Lab-on-a-chip Systems.

Design and fabrication of a microfluidic detection chip

A Novel Microfluidics Droplet-Based Interdigitated Ring-Shaped Electrode Sensor for Lab-on-a-Chip Applications