Abstract:Two-dimensional (2D) InSe-based field effect transistor (FET) has shown remarkable carrier mobility and high on-off ratio in experimental reports. Theoretical investigations also predicated the high performance can be well preserved at sub-10 nm nodes in the ballistic limit. However, both experimental experience and theoretical calculations pointed out achieving high-quality ohmic has become the main limiting factor for high-performance 2D FET. In this work, we proposed a new sandwiched ohmic contact with indium for InSe FET and comprehensively evaluated its performance from views of material and device based on ab initio methods. The material properties denote that all of fundamental issues of ohmic contact including tunneling barrier, the Schottky barrier, and effective doping are well concerned by introducing the sandwiched structure, and excellent contact resistance was achieved. At device performance level, devices with gate length of 7, 5, and 3 nm were investigated. All metrics of sandwiched contacted devices far exceed requirement of the International Technology Roadmap for Semiconductors (ITRS) and exhibit obvious promotion as compared to conventional structures. Maximum boost of current with 69.4%, 50%, and 49% are achieved for devices with 7, 5, and 3 nm gate length, respectively. Meanwhile, maximum reduction of the intrinsic delay with 20.4%, 16.7%, and 18.9% are attained. Moreover, a benchmark of energy-delay product (EDP) against other 2D FETs is presented. All InSe FETs with sandwiched ohmic contact surpass MoS2 FETs as well as requirement from ITRS 2024. The best result approaches the upper limit of ideal BP FET, denoting superior preponderance of sandwiched structures for InSe FETs in the next generation of complementary metal-oxide semiconductor (CMOS) technology.

On-State Current Optimization for SnSe2 Tunneling Field Effect Transistors with Silicene Electrodes

Lifting on-state currents for GeS-based tunneling field-effect transistors with electrode optimization

High On-State Current P-Type Tunnel Effect Transistor Based on Doping Modulation

Design of Gesn-Based Heterojunction-Enhanced N-Channel Tunneling Fet with Improved Subthreshold Swing and On-State Current

Characteristics of InAs/GaSb Line-Tunneling FETs with Buried Drain Technique

Sub-10 Nm Tunneling Field-Effect Transistors Based on Monolayer Group IV Mono-Chalcogenides

A Novel Planar InAs/Si Hetero-TFET with Buried Drain Design and Face-tunneling Technique

Layer‐Controlled Low‐Power Tunneling Transistors Based on SnS Homojunction

A Novel High-Performance Planar InAs/GaSb Face-Tunneling FET With Implanted Drain for Leakage Current Reduction

Tunable Snse2/Wse2 Heterostructure Tunneling Field Effect Transistor

Tunable Band Gap and Doping Type in Silicene by Surface Adsorption: Towards Tunneling Transistors.

Enhancing subthreshold slope and ON-current in a simple iTFET with overlapping gate on source-contact, drain Schottky contact, and intrinsic SiGe-pocket

Optimizing 2D-metal contact in layered Tin-selenide via native oxide modulation

Relaxed Germanium-Tin P-Channel Tunneling Field-Effect Transistors Fabricated on Si: Impacts of Sn Composition and Uniaxial Tensile Strain

High-Performance Two-Dimensional InSe Field-Effect Transistors with Novel Sandwiched Ohmic Contact for Sub-10 nm Nodes: a Theoretical Study

Enhanced Performance of Gesn Source-Pocket Tunnel Field-Effect Transistors for Low-Power Applications

High performance tunnel field-effect transistor by gate and source engineering.

SnSe field-effect transistors with improved electrical properties

Alleviation of Schottky barrier heights at TMDs/metal interfaces with a tunneling layer of semiconducting InSe nanoflake

A Novel Tunnel FET Design Through Adaptive Bandgap Engineering with Constant Sub-Threshold Slope over 5 Decades of Current and High $\text{i}_{\mathrm {on}}/\text{i}_{\mathrm {OFF}}$ Ratio

TCAD Simulations of Reconfigurable Field-Effect Transistor with Embedded-Fin-Contact to Improve On-Current