Abstract:The anode interlayer plays a critical role in the performance of organic photodetectors, which requires sufficient electron-blocking ability to simultaneously attain a high photocurrent and low dark current. Here, we developed two cross-linkable polymers, which can be deposited on the top of the widely used poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) and form a robust layer that can effectively suppress the electron injection from the anode under reverse bias. The optimized device with the resulting cross-linkable XP2 exhibited the lowest dark current density of 5.81 × 10–9 A cm–2 at −0.1 V, which is about 2 orders of magnitude lower than the control devices. A remarkable responsivity of 0.5 A W–1 and a detectivity of >1 × 1013 Jones at a near-infrared wavelength of 800 nm were achieved. Of particular importance is that the resulting device exhibited a linear dynamic range of >135 dB associated with a high working frequency that is shorter than typical commercial digital imagers. The planar heterojunction devices demonstrate that the dark current is closely correlated to the charge generation, which relied on the highest occupied molecular orbital energy levels of the developed cross-linked interlays. The Mott–Schottky analysis revealed that the optimized cross-linked interlayer increased the depletion width of the devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13833?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13833</a>.Synthesis routines of XP1, XP2, and PFT-OEHp; solvent rinsing tests; cyclic voltammetry measurement; AFM images; EQE spectra; optimization of XP2; device performance with inverted structure; detailed Mott–Schottky analysis; and performance of peer OPDs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13833/suppl_file/am0c13833_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dual Interface Modification Using Potassium Aspartic Acid to Realize Low Dark Current, High-Speed Nonfullerene Photodetectors.

Mitigating Dark Current and Improving Charge Collection for High-Performance Near-Infrared Organic Photodiodes Via P-Doping Strategy

Interfacial Engineering for Photomultiplication Type Organic Photodetectors with Signal‐Noise‐Ratio over 89 000

A Direct surface modification strategy of ITO anodes enables high-performance organic photodetectors

Efficient hole extraction and dark current suppression in organic photodetectors enabled by atomic-layer-deposition of ultrathin Co<sub>3</sub>O<sub>4</sub> interlayers

Self‐Powered Organic Photodetectors with High Detectivity for Near Infrared Light Detection Enabled by Dark Current Reduction

Organic Photodiodes with Thermally Reliable Dark Current and Excellent Detectivity Enabled by Low Donor Concentration.

High-Detectivity Non-Fullerene Organic Photodetectors Enabled by a Cross-Linkable Electron Blocking Layer

Intrinsic Charge Manipulation for Solution-Processed Organic Photodetectors with High Sensitivity and Fast Response

Double-side responsive polymer near-infrared photodetectors with transfer-printed electrode

High‐Efficiency Semitransparent Near‐Infrared Organic Photodetectors Enabled by a Molecular Crystal Network

Enhanced Detectivity of Organic Photodetectors with a Non-Conjugated Polymer Additive

Efficient Ultrathin Self‐Powered Organic Photodetector with Reduced Exciton Binding Energy and Auxiliary Föster Resonance Energy Transfer Processes

Suppressing the Dark Current under Forward Bias for Dual‐Mode Organic Photodiodes

High-Performance Organic Photodetectors from a High-Bandgap Indacenodithiophene-Based Π-Conjugated Donor–Acceptor Polymer

Photo-crosslinking and layer-by-layer processed organic photodetectors with remarkably suppressed dark current

Ultra-narrow Bandgap Electron Acceptor with Low Reorganization Energy and Refined Crystallization Enables Efficient Self-Powered Photodetectors with Spectral Response over 1100 Nm

High-performance organic solar cell and self-power photodetector with chemically robust, near-infrared acceptor enabled by strengthening interfacial contact and compositional modulation

Diminished Trap-Induced Leakage Current at the Organic/Electrode Interface for High-Performance Organic Photodetectors

High Performance Near-infrared Organic Photodetectors Based on Narrow-bandgap Diketopyrrolopyrrole-based Polymer

High-responsivity, High-detectivity Photomultiplication Organic Photodetector Realized by a Metal-Insulator-Semiconductor Tunneling Junction